Motorcycle Helmets

The Importance of a Good Motorcycle Helmet

By: Brian Benko

Anyone who decides to get a motorcycle must understand that a helmet is probably the most important safety consideration. The fact that riders are more vulnerable in crash situations is obvious, but crash statistics paints an even grimmer picture. Despite repeated warnings and horrible stories of crash victims, many people still fail to realize the importance of wearing a good helmet.

Head injuries are the most prevalent cause of death in motorcycle accidents. In cases where the rider was without a helmet, the death or injury could have been prevented by the fact that the helmet absorbs much of the force of impact. The issue has gained so much attention that governments have gotten involved. Now most countries have laws requiring motorcycle riders to wear helmets.

How a Motorcycle Helmet Works

The majority of motorcycle helmets are constructed from plastic. They are designed with special crumple zones which absorb most of the shock on impact. The more expensive helmets are usually made a combination of carbon fiber and Kevlar.

The interior of the helmet is padded to help it fit more securely and to offer added protection. In the event of a collision, helmets are designed to crack and break in certain areas because of the shock they absorb.

Types of Helmets

The helmet a rider chooses will depend on certain factors which include the type of motorcycle, weather conditions. Other considerations include whether it will be used for sport, and the type of sport. Motocross helmets are designed differently than other racing helmets.

There are helmets which were not specially designed for motorcycle safety which are worn by riders. The types of helmets which are specially made for motorcycle riders are:

Full Face Helmet: This provides the best coverage for the head and face. The face shield protects the wearer from debris and insects that could disrupt the rider's concentration. It also prevents injury to the face and head in the event of a crash.

The Modular Helmet: This is also referred to as the flip up because the front portion can be pivoted upwards. When closed it resembles the full face design.

The Motocross: This is a specially designed helmet for those who ride dirt bikes. It has extra protection for the chin area and a visor. Because it has an open face design, it requires the wearing of goggles for full protection.

The Open Face: This type of helmet covers the head but has no chin bar or protection for the face. Riders can wear goggles for protection from debris but it can also be fitted with a face shield.

Half Helmet: This offers very little protection in the event of a crash. In fact it is only recommended when travelling for short distances. Dust and other debris can still affect the rider even with the use of goggles.
Motorcycle Safety

There are other tips to remember for motorcycle safety. If your helmet has protected you in a crash it is recommended that you discard it. This is true even if it appears undamaged.

Riders who wear full face helmets with tinted face shields should consider getting a different helmet for nighttime riding. The darkened shield can obscure your vision at night, increasing the chances of an accident.

Many deaths resulting from motorcycle accidents are caused by head injuries. As such, the helmet as a protective device and important piece of motorcycle gear cannot be overstated. There are many designs available which should suit even the most discerning riders.


Author Resource:->  Brian Benko at MotorcycleHelmet offers the best ideas and information about in motorcycle helmets. Visit MotorcycleHelmet for the latest on motorcycle helmets. Buy or sell your custom helmet at http://www.motorcyclehelmet.com/

Article From ArticleSlide.com

Belfast Motorcycle Safety Hints And Tips
By: Tom Jones

Driving motorcycle can be fun. But, it is equally important for all the motorists and riders to be very careful and cautious while riding the bike. Below listed are a few tips that should be followed by all the motorists and riders:

1.Choose quality: It is always better to go in for quality than looks. Therefore, it becomes quite imperative to go in for the best and the quality parts for your motorcycle that are affordable by you. There are quite a few reasons associated with it. Firstly, any part that you replace for your motorcycle is extremely important for it. Secondly, you will not gain anything by saving a few extra pounds by buying cheap and potentially defective parts. Never try to compromise on the quality. This is very important, as this concerns your own personal safety. You should not wait for the circumstances to prove you this quality aspect, as these circumstances could potentially prove to be fatal.

2.Keep Safe: It is very important to protect yourself from head to toe by using protective apparels and gears. These mainly include boots, socks, trousers, eyewear, vest, gloves, jacket, and last but not the least motorcycle helmet. Always ensure that these products that are bought by you are of good quality and, at the same time comfortable and durable, so as to withstand all the momentum and pressure while riding. It is very important for you to understand that you should never compromise on the quality as the result can be quite surprising and alarming for anyone.

3.Repair and maintenance: If there is any problem occurring with your motorcycle, it has to be checked and rectified instantly. You should also ensure that your motorcycle goes for regular maintenance and services. Whenever you plan for any adventurous trip, it is very important to get your motorcycle checked for any kind of defects or leaks and get them repaired at the earliest to avoid any further issues. It is quite essential for you to check all these aspects without any delay in time and with complete diligence. Besides this to make sure for the safety and condition of your motorcycle, you should go ahead with all the necessary regular repairs.

4.Be prepared: Always ensure that you keep the tank full of your motorcycle at given point of time. As a matter of fact, there should be enough fuel in your motorcycle to carry you to your destination.

In case of any compensatory situation, your insurance will take care of all the necessary damages and payouts and save you from any kind of big losses. It is very important for us to understand that everything that we do is a compromise. As a result, it becomes quite important for us to understand all the implications fully and be very careful. Safety is the most important aspect for anyone in this world, particularly if they ride in major cities such as Belfast motorcycles need to be in good working order at all times.


Author Resource:->  Charles Hurst Group offer a wide range of Belfast Motorcycles

Article From ArticleSlide.com

The Safety Standards of Motorcycle Helmets

By: Alex De Mostafa

In 1972, The National Highway Traffic Safety Administration (HHTSA) set about creating new minimal safety standards for motorcycle helmets. Federal Motor Vehicle Safety Standard 218, commonly called the DOT (Department of Transportation) standard, was initiated and signed into law. The act marked the culmination of years of review and analysis. The DOT standard was revised slightly in 1974 and has subsequently undergone other minor alterations, but basically has remained unchanged for more than 30 years.

The purpose of DOT standard 218 is to identify helmets that comply with government standards for helmet safety. It should be noted that motorcycle helmets are not required in some states and that while the Federal Government has set safety standards, there is a general lack of enforcement and oversight by the program. Basically, the government has established outdated safety standards and relies on the manufacturers to comply and attest to their compliance with these standards. Based on the manufacturer's representation, a DOT stamp of approval is placed on each helmet.

This is not to say that the government does not test helmets. Each year, DOT provides token testing and presents manufacturers with the results. However, in 2001, the government inspected just 40 helmets. The Department of Transportation relies almost exclusively on the helmet manufacturers to meet the safety standards. As government-testing requirements are minimal, motorcyclists have long expressed concern over the safety of helmets.

The DOT standard for testing requires that helmets be tested twice at four different impact zones. DOT approved helmets are dropped from a 6 foot height onto a flat anvil and then again from a 4.5 foot height. The manufacturer is required to sign off on compliance with these standards prior to applying the DOT emblem to the helmet. However, in the 40 unit testing performed directly by DOT in 2001, 20% of the helmets failed the test.

In the motorcycle helmet industry, more stringent safety requirements are applied by the independent Snell Standards set by the Snell Memorial Foundation (SMF). The Snell Memorial Foundation is a not-for-profit organization dedicated to advancing motor sporting helmet safety. The foundation was established in 1957 in memory of racecar driver William Peter Snell and has since served as the recognized leader in safety standards for a variety of sporting helmets. Unlike the Department of Transportation, the SMF aggressively and randomly tests many motorcycle helmets each year.

SMF maintains two testing facilities; one in the U.S. and another in England. Manufacturers, who subscribe to the Snell standards, submit their helmets to the organization for recognized certification. These helmet manufacturers agree to periodic testing and agree to comply with the more current Snell safety standards for motorcycle helmets. Snell safety standards are not exclusive to the motorcycle industry and are used for harness racing, other equestrian sports, cycling, skiing and snowboarding.

While the DOT standards have been virtually unchanged since 1974, the SMF standards have been updated every five years. Additionally, the Snell testing procedures are much more aggressive. Whereas DOT tests use drop elevations of 6 feet and 4.5 feet respectively, the SMF utilizes 10 foot and 7.5 foot drop elevations.

Both DOT and Snell acknowledge that it is rarely the fall that damages the head. Rather, it is the sudden stop. To measure the effectiveness of the motorcycle helmet in coping with the stress of a sudden halt, both testing programs utilize an accelerator set inside the headgear.

The Snell tests do not leave interpretation of the results to the manufacturer. These more strenuous tests focus on the manufacturing quality of the motorcycle helmets. As a result, the Snell method of testing does not use the flat anvil, but rather an edged anvil that is designed to further test the helmet's material construction.

Cyclists who use helmets bearing the Snell label of approval are assured of helmets that not only surpass the DOT safety standards, but have undergone independent testing and whose manufacturers have made assurances of strict compliance. The Snell certificate of approval goes a long way with consumers and industry experts. The Snell label on the back of the helmet is the industry symbol for safety design and structural integrity.


Author Resource:->  Savin Scalp Helmets.com your one stop shop for motorcycle and novelty helmets of all shapes and sizes. We provide a wide selection of affordable novelty, half or full face, and motorcross helmets. Our brands include Voss, Caliber, Daytona, Hawk, Outlaw, Bell, and Rhodia. Visit us online today at www.savinscalphelmets.com for more information.

Article From ArticleSlide.com

Ten Things to Consider When Purchasing a New Motorcycle Helmet

By: Alex De Mostafa

Whether you are a new cyclist, getting your favorite rider a new helmet as a gift, or an experienced rider considering a change of headgear, there are a few basic issues to consider before you purchase your new motorcycle helmet.

1.) Does it pass the safety tests? - That snazzy new brain bucket may look good, but it'll be of little use if it doesn't meet certain safety standard regulations. The US Department of Transportation requires that all helmets meet certain standards, such as impact absorption, penetration prevention and strap stability. When a helmet is manufactured to meet these standards, the DOT puts a neat little sticker right on it (or the box) declaring so. A DOT certification should be the minimum standard to look for.

2.) Does it pass the roll off test? - Your helmet should not be so loose that you can roll it off the front of your head when it is properly fastened. To perform a roll-off test, secure the helmet to your head. Grasp the back of the helmet and try to pull it forward over your face. If it comes off, even though it hurts your ears in doing so, the helmet is not a proper fit or style for you.

3.) Does it stay put? - To check the fit on your helmet, as quickly as possible shake your head as if trying to touch your ear to your shoulder, from side to side as if saying a big "No" and from back to front touching your chin to your chest. If the helmet stays in place, it fits. If not, either look for another helmet, or see if there's a way to make yours fit better. Many helmets come with advice for giving them a snug, safe fit. Your dealer may be able to help, too..

4.) Is it comfortable? - Now, some riders will tell you that there is no such thing as a comfortable helmet. We'll not debate that here, but we will say that the more helmets you try on, the better your odds of finding one you like. Full-face motorcycle helmets are considered more comfortable by most riders who have tried them. Comfort levels increase with the quality of the brand and the cost of the helmet, too. The things to avoid are squeezing of the ears, pressure at the crown and/or forehead, and any general "hard points" in the helmet. Visit several dealers or shops. Try on lots of different brands and models. Put them all through the roll-off and head-shake tests, too, to ensure that fit and safety are a factor as well as comfort. Leave a helmet on for 15 minutes or so, to allow it to "settle" on your head. Next to your saddle, it'll be your biggest source of comfort or discomfort while riding.

5.) What's it cover? - Full-face helmets are considered the safest and most comfortable of the lot. Flip-face, modular, or system motorcycle helmets are a good marriage between the open-faced models and the full-faced ones. Open-face models can expose the rider to facial injuries in a crash, and studies have shown that riders who suffer facial injuries are 3 times more likely to suffer brain injury, as well. When considering a new helmet, remember that one day your chin could be bouncing off the pavement.

6.) What about the face shield? - It should seal the helmet all the way around the edges to prevent wind leakage. It should have VESC - 8 and ANSI Z - 87 safety standards, usually molded right into it. It should be easy to operate, raising easily and staying up without dropping. Look for any sight-distorting imperfections. Most shields offer UV protection to some degree. A tinted face shield might be a good addition, for those really sunny rides.

7.) Any convenience features? - Does it come with a storage bag? Does it have an extra face shield? How easy is it to change the face shields? Will the strap end stay where it's supposed to or is it going to flap in the wind? How easy is it going to be to remove and wash the lining? Take your helmet for a test drive. Attempt to change the face shield. Mess with the strap. Take the lining out. Short of dropping it from the roof to test its scratch resistance, see just how many convenience features your helmet has, and whether or not they are really convenient for you.

8.) Any comfort features? You thought we'd already discussed comfort, hadn't you? Well, there are things that can make a helmet more comfortable like vents, padded straps and variable thickness inner padding. What one rider may consider comfortable, another might find constricting.

9.) Looks? Everybody wants the coolest looking dome on the street, but beware that the more graphics and colors used increases the price significantly. If you find one that passes all your criteria for the "perfect" helmet, but it's astronomically priced, ask if its available in a solid color. If you plan on custom painting, your best bet is solid white. The brighter the color, the more other drivers will notice you, so you may want to consider red, yellow or even orange. Some motorcycle manufacturers offer limited helmet color schemes to match each year's bikes. Some helmet companies do, too.

10.) Cost? So, your quest has led you to a helmet with a price tag so high it's going to drain your bank account. What now? Well, take note of the bit above about graphics. Try to negotiate with your dealer. He's invested a lot of time into you, helping you try on different helmets, get the right fit etc. It may be worth it to him to lower the price a bit. See if you can get a slightly less-tricked-out model. Don't sacrifice comfort or safety for the sake of a few bucks, but if you can afford a less-expensive model with fewer convenience features, go for it!

You may actually put more time and effort and energy into buying your new helmet than you did your bike. But it'll be worth it in the long ride.


Author Resource:->  Savin Scalp Helmets.com your one stop shop for motorcycle and novelty helmets of all shapes and sizes. We provide a wide selection of affordable novelty, half or full face, and motorcross helmets. Our brands include Voss, Caliber, Daytona, Hawk, Outlaw, Bell, and Rhodia. Visit us online today.

Article From ArticleSlide.com

The In And Out Of A Carbon Fiber Motorcycle Helmet

By: Corey Palmer

Some of the most modern and popular motor cycle helmets on the market today have to be the ones made of a material called carbon fiber. The technology now available in the making of motorcycle helmets and other protective wear means we are getting better quality, better protection and more comfort.

Carbon fiber is made from small threads of carbon filaments which are sewn or woven into other fabrics such as felt. These carbon fibers are also used to make up the hard shell or protective part of the motor cycle helmet. What results is a strong and light helmet that is both comfortable to wear and will help save your life.

These helmets are made in a way to make you feel cooler than a regular helmet which is really nice on a hot summer day on the highway. Some also feature anti-fog options as well if you plan on using a face mask and may be driving in fog or other hazy weather. These helmets are designed to make sure there is no obstructed view as well.

Because of the way that these carbon fibers are manufactured, the results are of better strength and hardness. Some could actually say that these become as strong as some metals without having to deal with all the weight that would be involved with metal.

To make a carbon fiber helmet even more durable and protective, sometimes they are mixed with kevlar. When you combine kevlar with carbon fibers, you end up with something with the strength of three times that of kevlar.

It is also important to note that carbon fiber helmets for motorcycles are usually approved by the Department of Transportation or DOT. You will definitely want to make sure that your helmet is legal to use on the road. It would be a shame to get pulled over and find out the hard way with a ticket or worse.

If you are looking to buy these types of carbon fiber helmets, at the moment they are mainly available through custom bike shops. However, more and more regular shops are beginning to keep these in stock as they become more popular. Soon you will probably find these everywhere!

Carbon fiber helmets and other equipment goes to show how far technology has come in the motorcycle and protective garmet industry. There are a huge variety of different models and styles to choose from so get shopping!


Author Resource:->  Corey Palmer is a motorcycle enthusiast and shop owner. Check out some carbon fiber motorcycle helmets, carbon fiber sheet and carbon fiber tube.

Article From ArticleSlide.com

Scorpion Motorcycle Helmets

By: Dona Rosa

Do you love to go biking? Do you own a nice manly motorbike? Missing something a helmet maybe?
We all know it s rather nice a feeling when you are riding that bike and the wind flows through your hair, but if you weren t aware, we d tell you, it s at a great risk that you do so. Buy a helmet, even if it s expensive, because in the end, it might end up saving you from mind boggling hospital expenses.

Well, ever ended up looking for cheaper helmets without the DOT label of approval? Those are just junks since they are flimsy and won t be able to save lives! Learn to compromise and learn that money can buy you safety. Look around and we re sure you ll get one that suits your needs. Read on to find out more about Scorpion motorcycle helmets...

So what do Scorpion Helmets have that other brands don t have?

One motorcycle helmet you can rely on is the Scorpion motorcycle helmet. Why? The prices are affordable and the quality is the best you ll get in the market. Scorpion manufactures products that are mainly helmets. They use the best designers in the business to design those motorcycle helmets so they are as good as custom made ones! The materials used are highly durable and of the highest quality and several special processes are used to produce things that ll not only last longer, but also be within the safety levels and standards.

Scorpion manufactures entire helmets themselves, without allowing any outsourcing or subcontracting. The helmets are all produced and made to last, in their own plant, therefore, each step in its making is carefully monitored and kept under strictly controlled conditions to yield the finest helmets you ve ever worn!

So how do they make them?

Most helmets these days are manufactured so that they don t break or shatter on impact. Scorpion uses Kevlar matrix shell or fiberglass. There s a DOT label or Snell 2000 certification lined on the chin bar, which allow you to check for authenticity. These helmets are seriously a great buy. If you want to know one other further feature that ll make you go Wow we ll tell you about the anti fog functions that Scorpion motorcycle helmets boast.

The Scorpion helmets are manufactured mainly in China but are designed and inspected in the United States. The inner layering of the helmets is made of the highest quality fabric. The fabric absorbs the moisture from the forehead and the in built ventilation system allows air to flow freely so that you don t suffocate. This ll keep you cool and fresh.

Characteristics of the Scorpion that Put Them a World Apart from the Rest

The helmet is a bit heavy when compared to other ones, but it s always worth it, especially when you look at the safety features you are being offered. When you wear it, it should fit you perfectly and be sealed properly. How do you realize if it s been sealed correctly? Well, there ll be good drop in the ordinary levels of sound when you re cruising.

You should feel satisfied and assured that when you buy a Scorpion helmet, it s the world s best motorcycling helmet! It s really worth the money! Of course, if you want to make it last, you have to make some efforts to maintain it.

Get a pair of great motorcycling boots to go with that helmet, and be the center of attraction, even on the roads!


Author Resource:->  For more info, visit: http://www.rockytopleather.com/ Rocky Top Leather and see what fine goods they have there like a nice new http://www.rockytopleather.com/categories/mens-motorcycle-boots motorcycle boots for you!

Article From ArticleSlide.com

How To Choose Motorcycle Protective Gear

By: Jay Gaulard

Riding a motorcycle is one of the more exhilarating methods of traveling, but it's also more dangerous than being in a car, especially if you don't have the right protective gear. You can significantly reduce the risk of severe injury if you take the time to pick out some safety gear to wear while on your motorcycle.

There are a lot of different options in protective gear, so it's a good idea to know what you're looking at. Here, we'll go over some of the more popular types of protective gear to help you make the right choices and get the gear that will best protect you.

Helmets

The variety of motorcycle helmets on the market is staggering. Aside from the visual factor, choosing a helmet that you like the looks of, there are a few other things to keep in mind. Size is very important. Your head should fit snugly within the helmet. If you can slip it over your head, then it's too big, it should need to be pulled on. The soft foam inside will form to fit your head as you wear it, to provide greater protection.

Look for a helmet that starts right above the eyebrows when on. Anything higher up will not give adequate protection. You have a choice between a full face helmet, which offers the best protection, a three quarters helmet and a flip up helmet, which allows you to move the faceplate up to expose the face. This last one may be more expensive, but it does offer the advantage of being able to simply lift the faceplate rather than remove the entire helmet to speak or drink something.

Gloves

There are two main reasons to wear gloves while riding. The first is to keep your hands warm, particularly while riding during winter, when the icy wind can quickly numb them and prevent the proper sensations needed to control the motorcycle. The second is protection should you take a tumble. Fingers and the flesh on the hands are very fragile and you need as much protection as possible.

The best gloves for motorcycle riding include Kevlar pads on the backs, with extra grip on the palms for maximum control. You will probably need a lighter pair for summer use and heavier ones for winter, or opt to wear a light pair of cotton gloves under the Kevlar ones.

Boots

When shopping for boots to use on your motorcycle, keep in mind whether you'll need to walk or not. The best protection comes at a price, limited mobility. If you'll be walking as well as riding, then look for heavy duty boots that are built for cross-country endurance. These will give strong ankle support and have thick, resistant soles to protect your feet should an accident occur.

For motocross riding, consider using specialized boots that protect as much of the leg as possible, with rigidity. These are definitely not practical for walking in, however, so keep that in mind.

Pants

There is much more to your body than simply head, hands and feet and it pays to protect the rest of it as well. Your legs will be at risk, as they are so close to the bike, so proper pants can help protect them.

Finding a pair of pants that looks good, is comfortable to wear in summer and still provides enough protection for sliding across the road is next to impossible. It really all comes down to what type of riding you'll be doing. For the riskier rides, Kevlar padded pants are probably your best bet. These usually come with extra pads on exposed areas like the knees which aren't exactly visually pleasing, but do offer extra protection.

For more formal rides, there are now jeans with Kevlar fibers woven into them that provide extra protection should you be dumped off the bike. Other options include leather pants and motocross pants, both of which tend to be quite hot in warmer weather. You may also opt for leather chaps, which cover and protect the legs, but allow for maximum movement.

Jackets

Choosing a good jacket is also very important. This is what will keep your torso and arms protected. You'll find that there are two main options, synthetic and leather. Each has its advantages and disadvantages.

Leather jackets tend to be well built and last for a long time, decades, even. They are the classic protective wear associated with motorcycles, so many more traditional motorcyclists prefer leather. These tend to be quite protective and are made more so by protective pads sewn to the inside of the jackets. However, they aren't very reliable under rain and tend not to protect as well as synthetic from the cold. The darker colors of leather tend to prevent visibility, which can be an added danger, particularly in the evening.

Synthetic jackets are usually more expensive, but offer better protection. Unfortunately, despite the higher protective rate, they tend to wear out faster than leather. Synthetic fibers make these jackets warmer in the winter and ensure that they are completely waterproof, which is a major bonus if you are planning on a long trip. The brighter colors of synthetic jackets also mean that you will be more visible on the road.

Choosing your protective gear for motorcycle riding is one of the most important steps you can take toward staying safe. Make sure that you take the time to research and try the various types of protective gear. Everything should fit well and be comfortable, but still offer the highest level of protection possible.

No one wants to think about having an accident, but these things do happen and with a motorcycle, you simply don't have the same protection around you as you would in a more substantial vehicle. That doesn't mean taking unnecessary risks is required, however. There is plenty of gear that can be used to keep your body and skin intact as you enjoy riding.


Author Resource:->  Jay Gaulard writes for a wide selection of websites on various topics. He is a veteran of the internet and has come to be respected in his many areas of expertise. This article was written on behalf of MyCycleMarket, a popular motorcycle parts and accessories website.

Article From ArticleSlide.com

Motorcycle Helmets A Primer
By: Dona Rosa

Around a century back, bikers did not have to worry about their health and well being while driving motorcycles. This was because of the fact that the bikes they rode lacked in both features and power. When the first motorcycle was built in about 1885, no one cared about accidents and the injuries resulting from them.

Once better automobile engineering techniques and equally better resources were available, the motorcycles started increasing speed. Results were that the fatality rate of motorcycle riders rose with the advent of faster motorbikes.

A high number of deaths resulting from motorcycle accidents lead to an urgent need for the motorcycle helmet. Hence, the first commercial motorcycle helmet was made in 1953 by a professor from the University of Southern California. One of the main reasons stated behind this was because Harley Davidson and Indian Motorcycles were going to create motorcycles for the riders who wanted the thrill of speed.

Head Protection

Protecting the head when one rides the motorcycle is very important. A motorcycle helmet is one of the most important requirements of safe driving and mostly precedes all other safety gears. Its need increases especially when one considers the statistics where motorcycle fatalities are cited as being one of the most dominant causes of brain injuries today.

Many riders due to various reasons, physical or psychological, tend not to wear motorcycle helmets. However, it is advisable for them not to sustain this habit as this could lead to dangerous consequences.

Note: it should be appreciated that many countries have stepped in to make wearing a helmet mandatory by including it in their law. It is advisable for both the drivers as well as any passengers to wear helmets.

About Helmets

In case of an accident, the impact is absorbed by a motorcycle helmet. One of the first things that one should look for in a helmet is the material of the helmet. A helmet should ideally be lightweight and tough.

Today, crack resistant fibers and high grade plastic have made the helmet manufacturing processes very easy and efficient. Motorcycle helmets should have high impact resistance and high quality.

While buying a helmet one should remember that the money spent on a helmet is worth its benefits. A helmet that does its job is always worth more then the money spent on it.

While buying a helmet, the next important thing to remember is the comfort that the helmet provides. Today markets are filled with many types of helmets; the full faced helmet is the safest option and should be preferred over other types. One could also choose the half face helmet which offers a good protection and gives a wider view of the road.

Along with having a tough body, helmets should ideally carry a clear visor that can shield the face and eyes from wind as well as dust. A helmet should fit properly, cover the full face, feel soft and itch less at the places of contact, and be of sweat absorbing material on the inside. The choice of color, stickers, and graphics depends entirely upon an individual.

Today helmets are available in many shapes and sizes according to your requirements. Many branded helmet manufactures have incorporated facilities like ventilation systems, and anti fog visors, while keeping in view of not hindering the biking experience craved by the bikers.


Author Resource:->  For more info, visit: http://www.rockytopleather.com/ Rocky Top Leather and see what fine goods they have there like http://www.rockytopleather.com/categories/motorcycle-helmets men's helmets

Article From ArticleSlide.com

How To Avoid Brain Injuries To Your Child

By: John Myre

Tommy now had the coolest bike on the block. It was sleek, shiny black, and made for speed. The bike came with a new helmet, but how cool was that? Girls were not impressed by helmets.

He was a dashing figure until he hit the manhole cover and flew face first into the street, knocking out his two front teeth and causing a concussion that sent him to the hospital for two days.

Today his smile is a little crooked, but he keeps his safety helmet on perfectly straight.

According to the Brain Injury Association, every year in the United States 1.4 million people are treated for traumatic brain injury (TBI) in hospital emergency rooms. About 50,000 people die each year from TBI, and 80,000 experience the onset of long-term disability.

Major causes of TBI are falls (28%), motor vehicle crashes (20%), struck by/against (19%), and assaults (11%). Alert parents need to know how to protect their children from brain injuries, and how to identify a serious injury.

Some Of The Facts

Nearly 200,000 traumatic brain injuries occur on U.S. sports fields each year. An estimated 65 percent of the injuries occur to young people 5 to 18 years old.

Repeated concussions not only impair memory and mental function over the long term, but may trigger "second impact syndrome," a sudden, fatal brain swelling.

There is no such thing as a "modest" concussion. And you don't have to be knocked out to suffer one. More than 90 percent of concussions don't involve loss of consciousness.

Experts agree that nobody who still has symptoms of a brain injury should be allowed to play again until all symptoms have cleared.

After a brain injury, the risk for a second injury is three times greater; after the second injury, the risk for a third injury is eight times greater.

Helmets First

A properly fitted helmet is the most important piece of safety equipment for many activities. For example, medical research shows that 88 percent of cyclists' brain injuries can be prevented by a helmet.

• 
  Different activities require different helmets.
  -Bicycle helmets are OK for bicycling, inline skating, skateboarding and roller-skating.
  -When around or riding horses, wear an equestrian helmet.
  -Use motorcycle helmets on motorcycles, ATVs, snowmobiles and minibikes.
  -Snow skiing and snowboarding require special helmets.
  
• 
  Only buy helmets that meet the certification requirements for a particular activity. For details on helmet selection and fitting, talk to an expert, or contact a national association for the activity or the Consumer Product Safety Commission.
  
• 
  The child should participate in the selection of the helmet. Do not buy one that a child can "grow into."
  
• 
  Never buy a used helmet! Do not use a helmet that has been dropped or involved in a collision.
  
• 
  If parents wear helmets, almost all kids wear them, too. If parents don't wear helmets, the number drops considerably.
  

In The Event Of A Brain Injury

• 
  After any fall or activity involving contact to the head, see a physician if any of the following symptoms are present: thinking problems; memory loss; dizziness; headache; nausea; sensory changes; balance, sleep or pain problems; changes in personality, mood or behavior; or trouble communicating.
  
• 
  Ask your child's teacher(s) to call you if they see any symptoms.
  
• 
  When your child leaves the emergency room or office following a brain injury, the doctor or nurse should give you instructions on caring for your child over the next 24 hours, and describe any important changes to watch for. If you do not get these "Head Sheet" instructions, ask for them.
  
• 
  The effects of a "mild" brain injury may not be seen immediately. See a doctor who specializes in brain injuries right away if you notice these changes in your child:
  -severe headache that does not go away or get better.
  -seizures, eyes fluttering, body going stiff, staring into space.
  -child forgets everything, amnesia.
  -hands shake, tremors, muscles get weak, loss of muscle tone.
  -nausea or vomiting that returns.
  

Author Resource:->  John Myre is the author of the award-winning book, Live Safely in a Dangerous World, and the publisher of the Safety Times Reproducible Articles..

Article From ArticleSlide.com

Secrets To Rocket Start a Booming Ebay Business

By: PARMOD BANSALI

For serious entrepreneurs, however, selling on eBay can be a good way to start a new business if you are willing to put in the time and energy required to make the business a success. eBay is also a good option for existing businesses to expand their reach by selling online.

Everyone from small used car dealers to giant companies like Dell Computers have discovered that eBay is an excellent place to hawk their wares simply due to the huge number of folks who visit the eBay site on a daily basis. Nowhere else on earth will you find such a large pool of potential customers.

Consider these numbers:

• There are nearly 69 million eBay users who spend $59 million every day.

• Most eBay sellers are home-based businesses that sell every- thing from porcelain dolls to locks of Elvis' hair to $100,000 Mercedes convertibles to $5 million dollar vacation homes.

• Every minute of every day more than 150 new items are listed for sale, more than 500 bids are placed, and seven new people register to shop on eBay.

• At any given moment, eBay is conducting some 12 million auctions, divided into about 18,000 different categories.

• About two million new items are offered for sale every day, and 62 million registered users scour the site to find them.

When it comes down to the mechanics of it all, running an eBay business is no different than running a brick and mortar business. You still have the same considerations regarding product selection, inventory purchasing, product pricing, inventory management, order processing, fulfillment, customer service, etc.

One of the biggest obstacles to building a successful eBay business may be the stiffness of the competition. Many sellers sell identical items and the price wars often get ugly, but that's to be expected in a free market place, which is exactly what eBay is.

So, can you build a profitable business selling on eBay?

Certainly, thousands of people have done it and so can you.

Here are a few tips to help get you started.

Sell Quality Products Don't sell junk! Leave the knick-knacks and fake leather jackets to the less informed. You should offer only quality products at a fair price.

Research The Competition Once you have your product in mind, don't invest a dime on inventory until you have spent some time on eBay to see what the competition is doing. If you want to sell motorcycle helmets, for example, you should look at current auctions to see how many others are selling similar helmets and what prices they are charging.

Test, Test, Test A fair portion of eBay auctions result in no sales, so it's best to test the waters before jumping in with both feet.

List a few items and see how they sell. If an item doesn't sell, list it at least twice more. Some items might not sell the first time, but may the second or third, then sell steadily from then on.

If an item gets no bids the first time, consider adjusting your price or your terms. If an item sells well, keep it in stock and then experiment with another item.

Do Your Homework eBay is too broad a subject to be covered fully here, but there are a multitude of books available that can help you start an eBay business. In fact, I bet you'll find most of them for sale at this very moment at eBay.


Author Resource:->  Please browse for more information at our websites





http://www.mining-auction-gold.com/





http://www.infozabout.com/

Article From ArticleSlide.com

Great Reasons to a Wear Motorcycle Helmet

By: Kevin Bailey

Wearing of motor cycle helmets is a very crucial safety precaution in prevention of head injuries associated with falls. According to the National Highway Traffic Safety Administration, NHTSA, a person wearing a motorcycle helmet has lower chances of fatalities from accidents compared to a person without a helmet. There are many reasons to wear motor cycle helmet, which include protection of face, ears and head from injuries. Due to availability of many varieties of helmets, one has a wide variety to choose. Some helmets are open to allow entry of wind to cool the face; others have a face guard that protects the face from wind.

When purchasing a motorcycle helmet, the price should not dictate the type of helmet bought, but the ability of the helmet to protect the head from impact. The helmet interior should be soft and warm. One of the reasons why a helmet is essential is because they allow riders to communicate with other riders through the hands free intercom system installed in helmets. Some people enjoy riding while enjoying the breeze and air thus they take off the helmet. For this reason, some helmets have adjustable face guards that allow entry of air while riding. These motorcycle helmets offer protection while enjoying cool air and breeze.

Other reasons to wear motor cycle helmets include the soft and warm interior of the helmets. Consequently, helmets are comfortable to wear. They prevent intense wind, which results to colds and eye disorders. They also protect riders from dust that leads to eye and respiratory tract diseases. Wind associated with riding is responsible for bone and joint disorders experienced by old riders. The helmet prevents these from occurring thus maintaining the health of the riders. Motorcycles helmets prevent burning effect on the head in case of falling. Burning effect occurs due to friction between the surface and head. Another protective aspect of motorcycle helmet is for safety during the night because of their shiny colors. At night, the shinny reflection prevents accidents from occurring since drivers are able to see the riders.

In the air, numerous bugs affect riders without helmets, therefore helmets boost rider's health and well-being. Helmets reduce rider fatigue associated with wind and noise thus enhancing the riding activity. Wearing a helmet portrays a rider as a responsible rider with affirmative attitude towards riding. Apart from protective purposes, the riders with helmets appear stylish thus enhancing beauty. Availability in many colors enhances variety. Riders modify their appearance as they ride.

When choosing a helmet, one must ensure it has the necessary features. A full-face helmet that has a screen is the best option. This type of helmet offers protection to the eyes, ears and head. Modern helmets are light but made of hard materials that is resistant to pressure and friction. Due to the light material, riders do not complain of fatigue. When purchasing a helmet, one should check for DOT or SNELL labels either on the outside or inside of helmet.


Author Resource:->  Kevin Bailey loves motorcycles.

Safety is very important when it comes to riding.

If you want to be safe, take a look at Cheap Helmets, HJC Helmets, and HCI Helmets.

Article From ArticleSlide.com

Reasons Not To Wear a Motorcycle Helmet

By: Kevin Bailey

There has been a big debate about cyclists safety and helmets. Perhaps one of the biggest discussion was when coming up with reasons not to wear a motorcycle helmet. Most people argue that helmets are only good for a speed of up to 15-18 miles per hour. If one goes faster that this and gets an accident, the helmet will not save his/her life. It is a choice for each person to wear a helmet or not. A study reported in the American journal of Public Health reveals that the abolishment of motorcycle helmet requirement for adults has been linked with a rise in motorcycle fatalities. Although the researchers argument is based on the universal helmet laws, the impact of these helmets is modest.

Some anti-helmet law activists dispute that helmets that are on balance, reduce motorcycle safety. This is because they make riders reckless, make their heads heavy or impair their vision, sensitivity to pressure and hearing abilities change. However, there is no much evidence to support this claim. It does not seem to have a very big effect but in principle, the fatality rate should not matter. The right to ride with no a helmet should not center on around how huge the risk is. In addition to questioning how effective helmets are, motorcycle activists have suggested that helmets contribute to causing accidents because they impair hearing, increase fatigue and impair peripheral vision. When an accident occurs, the additional weight increases the risk of spine and neck injury. Most motorcycle riders have attested that helmets are an unsafe obstruction to vision.

The argument as to why motorcycle riders should wear helmets is not firm because of the Peltzman effect. Cyclists wearing helmets take the advantage of an increase in safety and in return take more risks. Some of these risks include cycling at high speeds and running red lights. In this view, helmets give cyclists the benefit to reach their destinations faster and this makes them less safe. It is not true that the use of helmets is only justified in cycling because it is more dangerous than driving or walking. The risks of cycling are almost the same as those of pedestrians.

Wearing a helmet decreases the chances of getting brain injury, but increases the impact of the incidence on the thoracic and cervical spine fractures, which are sustained in motorcycle crashes. Helmets have been said to increase the risk of spinal fractures. When coming up with reasons not to wear a motorcycle helmet, comfort was a big topic of discussion. While buckling up a seat belt is painless for many people, wearing a motorcycle helmet is not. This is because the helmet is heavy and it covers most of the rider's head. This can be sweaty and tiring especially when it is hot. When sitting on a spotlight under 100% humidity with the sun heating up so hard and heat coming off the road, one may even pass out. There have been reported cases of motorcycle riders passing out on the spotlights with their helmets on.

Motorcycle helmets are viewed as stifling and confining meshes and forcing motorcycle riders to wear them ruins their freedom experience. Helmets are believed to increase the chances of attaining severe injuries on the neck and offset the chance to have a brain injury. Most people argue that wearing motorcycle helmet and seat belts are a personal decision and should not be a state law made by government. People have still not come up with satisfactory reasons on whether to wear or not to wear a motorcycle helmet.


Author Resource:->  Kevin Bailey loves motorcycles.

Safety is very important when it comes to riding.

If you want to be safe, take a look at Cheap Helmets, KBC Helmets, and M2R Helmets.

Article From ArticleSlide.com

One Industries: The One Stop Shop For All Motocross Apparel

By: Mike McGrath

One Industries has been manufacturing high end and top quality motocross apparel for many decades now. Their brand has come to be associated with high styling and durability coupled with ultra comfort fit kept in mind.

Motorcycle jackets

One Industries has a fantastic collection of motorcycle jackets aimed at the discerning motocross rider. The Track, Evilstar, Whitestar styles are amongst the most popular. These come in two predominant colors namely white and black. The Monster range of motorcycle jackets from One Industries has embroidered logos and white piping to create a stunning impression on onlookers. These motorcycle jackets are all made up of 100 cotton thereby ensuring complete comfort and ventilation as well as quick absorption of sweat etc. The heavyweight fleece usage coupled with the hooded complete zip sweatshirt all make for a complete fashion style statement with the assurance of it having full protection at all times.

Motocross helmets

The exclusive and stunning range of motocross helmets from One Industries is something one cannot ignore. The Kombat 07 and Kombat 08 collections as well as the Trooper 07 and 08 collections are highly popular and much in demand. These come in lovely colors like red, black, white, silver, tribal flame, purple and many other exciting choices in colors. Each of these motorcycle helmets comes with a superior exterior finish replete with high durability and protection from high impact jolts and injuries. As most motocross riders ride under very tough conditions and terrains it is imperative that their motocross helmets have adequate protection and comfort in them. One Industries does live up to the expectations of all motocross racers.

Helmet accessories

One Industries has also introduced a range of stunning motocross helmets and accessories. The range of visors is truly fascinating and available in the Flame, Monster, Racing Red, Bailey styles. The colors are also stunning with flat white, red, matte black and matte white available. Thus all motocross racers can enjoy making heads turn with these fabulous and high quality motorcycle helmets.

Miscellanous accessories

For all those motocross racers who like to have their own set of motocross accessories One Industries has that too. With an assorted collection of crossbar pads, decals, gear bags, hard goods, novelties and gifts, numbers, seat covers and other motocross graphics kits, socks, sweatshirts for men and women, cute shirts for women and rainwear etc. they have managed to capture the market very well. The range of crossbar pads from One Industries come in beautiful colors like silver, yellow, black, blue etc. The decals are also great to have as the front and rear fender decals and fork guard decals are a huge hit with all motocross fans. The gear bags are another set of motocross accessories which any serious minded racer needs to have. Available in colors like earthtone, black, navy, army green and chocolate brown these motorcycle accessories are sure to make heads turn in envy! When it comes to everything related to motocross One Industries is the name to reckon with.

Author Resource:-> Mike McGrath Offfroad, Motocross and MX Enthusiast http://www.bobscycle.com

Article From ArticleSlide.com

No Fear Motocross Apparel: Sophisticated Riding Gear

By: Mike McGrath

For those riding enthusiasts who love to ride in style No Fear has introduced a funky line of clothing and high end riding gear. Right from exclusive motocross boots to eased up motocross apparel like shirts for men and women there is a lot to choose from!

Offroad boots

The range of motocross boots from No Fear is designed for men and kids alike. The collection of these motocross boots comprises the Trophee collection which predominantly comes in black and white colors. Just as all trademark No Fear motocross apparel even in the case of these motocross boots style and comfort have been kept in mind. These masterfully designed boots have been crafted in style and provide real good value for money. The pivoted aluminum buckles as well as straps provide accurate fitting right from the top of the motocross boots right till the very bottom. There is also an accented leather burn guard to provide protection against heat and also offer high grip on the boots. The metal toe cap on the top of the motocross boots are very heavy duty and hence resistant to a wide range of rough riding conditions. The kids also have plenty of reason to rejoice as the vast array of designs and styles in these motocross boots is available in vibrant colors and designs.

Chest protectors

Most motocross riders have to ride under very strenuous conditions and difficult terrains. This is why No Fear has introduced a line of protective chest protective gear that constitutes its line of motocross apparel. These chest protectors have been designed for kids and adults alike. The most popular amongst these chest protectors is the Stratos collection which is available in white and black colors. Instead of the heavy and uncomfortable chest protectors from so many other brands, No Fear has gone one step ahead to provide comfort in this protector. Each of these motocross apparel has contoured shells for the body both at the back and the front to help ensure optimal fitting. The adjustable straps are slip resistant and even adjust perfectly on the shoulders. The front rubber TPR is replete with 3D graphics. The foam collar is seamless and is soft padded providing ultimate in comfort factor. There is also a front as well as rear venting mechanism and an optional removable arm piece to aid in protection. The chest protectors available for kids come in bright colors like black, blue, red, white etc.

Helmets for the racing action

No Fear also has an impressive collection of motocross helmets which define true style and comfort in one piece. The Optimal and Prime collections are the most popular amongst all motocross fans. The Dungeon, Lowbrau, Matte Gold, Silver. Monogram, Race Orange, Race Red, Spike Bitmap, Spike Blue, Tornado Blue, Trans AM Patriot, Bandana, Trans AM White, CMYK Plaid, Race Blue, Gothic Matte Navy, Race Red etc. are just some of the many favorites amongst the collection of these motorcycle helmets.

Author Resource:-> Mike Mc Grath Motocross and Offroad Enthusiast http://www.bobscycle.com

Article From ArticleSlide.com

5 Tips For Buying Cheap Motorcycle Helmets Online

By: Bill Mallett

If you are in the market for a new motorcycle helmet then this is the article for you. I live, eat, sleep and breathe motorcycles of all shapes and sizes and as such I have had the chance to learn a few tips and tricks about being able to save money on the gear.

Tip 1:

You can save a TON of money by buying online but getting the fit right can be difficult. I would suggest that you browse the helmet selections at the motorcycle shop to find the fit and size that you like and then go shopping online for it. Helmet fit is too important to your long term comfort and satisfaction with your helmet.

This tip only applies to noobs as most seasoned riders already know what size they take in a number of brands. At the very least make sure you measure your head and pay attention to the sizing charts for the brand of helmet you are interested in buying. Don t just check a generic sizing chart...go to the website of the manufacturer and check your measurements against their chart. Believe me, buying a helmet online is worth the effort.

Tip 2:

Once you have found a suitable helmet and you know what size you need then browse online at Ebay. In most cases you can save at least 20 30 online than you will versus a motorcycle shop and in many cases it will be even more than that. You can often buy a more expensive motorcycle helmet at cheap motorcycle helmets prices if you shop wisely.

In fact you can save so much money buying cheap motorcycle helmets online that you could probably afford to have more than one. Cool.

Tip 3:

Be armed with information! In many cases if you can save even more money on motorcycle helmets if they are last seasons colors or the racer that represents that brand has changed colors or changed teams. Last years models are typically every bit as hot and groundbreaking to most of us as the latest and greatest but they are even more attractive when you can buy them at cheap motorcycle helmets prices.

Tip 4:

Search the web for motorcycle helmet reviews and get more opinions on the particular motorcycle helmet that you are interested in. It is worthwhile to invest a small amount of time to make sure their aren t any hidden quirks or weird nuances that show themselves a few months down the road of ownership. Even cheap motorcycle helmets are worth investing a small amount of time researching.

Tip 5:

Last but not least, even though we are all in favor or buying cheap motorcycle helmets, buy the highest quality helmet you can afford. You don t have a $50 dollar brain and you shouldn t trust your brain to a $50 dollar helmet. Make sure your helmet carries DOT certification and SNELL where possible as these ensure a certain level of quality in that helmet. Cheap Motorcycle Helmets are great but you still want a quality motorcycle helmet that will do it s job if necessary.

I could go on but I am sure you are anxious to start your research so I will let you go. Be well and keep the shiny side up so you won t need that helmet for anything other than to keep your hair in place.

Author Resource:-> The author is an avid motorcycle enthusiast who unfortunately has had the need for a motorcycle helmet on a number of occasions. Make sure you check out more of his specific motorycle helmet reviews at http://cheapmotorcyclehelmetsonline.com to find the perfect helmet for you.

Article From ArticleSlide.com

4 Things to Consider when Shopping for Motorcycle Helmets

By: Justin Stewart

Motorcycle helmets can be the one thing that saves you from getting your skull smashed in and just getting a few cuts and bruises. If any one piece of safety equipment needs to be at its absolute best, it is motorcycle helmets. What makes a good helmet?

First, consider how much of your skull it actually covers. If the motorcycle helmets, cover just the back of the the skull and go no further, then there is the base of the skull is left vulnerable. If the back of the neck gets severely injured, not including death, you could be paralyzed and then you wouldn't have use for a motorcycle any longer. If motorcycle helmets cover all the way to the base of the skull you have a greater chance of obtaining less injury and you are less likely to die from an accident. Shorties or half helmets cover the minimum amount of skull as the law allows. While these helmets have a better coverage then no coverage at all, they do not have the maximum coverage.

Next, consider the comfort of the helmet. While safety is more important then comfort generally, if motorcycle helmets are not comfortable, chances are the driver or passenger will not keep the motorcycle helmets on, this can cause safety hazards. While the full face helmet offers greater coverage of the skull, it can also be uncomfortable, especially in heat and hot climates. It is hard to see if sweat drips in your eyes. It can also be hard to see with a full face helmet simply because of how much area covers the face. With comfort as an issue, the full face motorcycle helmets may not score as high. This means that the half helmet, or shorty would score higher for comfort, but not for safety and security.

Then, consider the visibility of motorcycle helmets. The brighter and whiter the helmet is, the more likely the driver of another vehicle or another motorcycle is likely to see you. While many people think that black motorcycle helmets look cool, they are much harder to see in all light then white motorcycle helmets, or even bright motorcycle helmets. Neon green motorcycle helmets will get a motorists attention before black helmets do. And white helmets may be a better match in heavily traveled areas. Unless they are areas specifically designed for motorcycle travel.

Finally, consider what the helmet is constructed from. The more reinforcements in motorcycle helmets, the safer it is. If you take a plain plastic helmet and put it up against a Kevlar reinforced helmet, chances are the plain plastic helmet will wear out or be destroyed long before the Kevlar reinforced motorcycle helmets are. Not only does the construction of motorcycle helmets come into play during an accident, consider whether you have dropped it, or thrown it, your motorcycle helmets integrity may be compromised. If this is the case, then the simple solution is to buy a new motorcycle helmet.

Author Resource:-> Click here to learn more about motorcycle helmets at The MotorcyclePedia.

Article From ArticleSlide.com