Motorcycle Helmets

By: Jeff D McQueen

The growing number of people who are hooked in motorcycling is noticeable thesedays. In fact, statistics can indicate a steady increase in the number of motorcycle owners all around the world. A motorbike can make a person look cool, especially for guys, or a more convenient and affordable transportation option for commuters.

The statistic of motorbike owners can also indicate an increased production of motorcycle helmets.A motorbike is an open vehicle so you have the least amount of protective shield in times of accidents. Hence, the government made it mandatory to wear helmets to lessen head injury occurrences that can result to death. And in buying helmets, a recommended rule is to buy the new ones instead of second hand headgears.

Second hand helmets cost less than the new ones so most buyers prefer to buy them. A lot of times, riders want to buy customized helmets that really caught their attention. The problem is these customized helmets can compromise your safety. Primarily, modification may lower its quality.First of all, there are some who customized their helmets to get additional comfort or ventilation.

They drill holes since they think the vents are not enough for them. The problem in doing this is drilling may cause cracks on the helmet and making it have lower quality than its original state. Most of the time, the cracks are not superficial but on the middle or inner layer. This means that the helmet may look okay but the quality is starting to be a problem underneath. There are some helmets that start to break just because of having these cracks.

Second, there are some people who love customizing helmets using paint. They may like a plain helmet at first but eventually got bored with it. This will cause them to use paints to change its looks. Some artistic individuals would create new designs with paint but no matter how artistic it is, it can also be the start of damages found on it. Some may have chosen the wrong type of paint for their helmets.

They may react and start to weaken the main helmet material. But aside from choosing the paint, application procedure can also be one damage cause on these helmets. Some owners may remove components just to apply the paint easily on its surface. The problem with this is the security of these components will not be the same compared to leaving it untouched. Hence, you may have placed the screws tightly but they are not as tight as what they used to be coming from manufacturers.

If you want to buy a customized helmet that will meet your preference, the best option for youis to buy the brand new ones but with designs suitable to your taste. Customizing these helmets is done with the right manufacturer's procedure so you are assured that the design is great without sacrificing its quality.

They also passed quality standards to ensure that they only sell quality helmets to their clients.In conclusion, buying second hand motorcycle helmets will save you money but don't do it just because of its modifications. No matter how you love its design, this will not guarantee its quality so better get the new ones with the design of your choice or get the second hand ones without modifications.


Author Resource:->  To find out more, check out: motorcycle helmets

Article From ArticleSlide.com

Peripheral Belting (New)

Wider Eyeport (New)
Series "I" Faceshield (New)
Airwing® (New, Patented)
Outward-Flaring Hyper-Ridge (New Design)
Arai's Compact Organic Shell Shape (Retained Feature)
DF-10 Diffuser (New)
Side-Vent Exhaust Ports (New Design)
New Brow-Vent Channeling (Modified Design)
Emergency Cheekpad Release System (New)
Removable/Replaceable Vented Neckroll (New)
Latest-Generation Dry-Cool® Liner (New Design)
Meets or Exceeds Snell and D.O.T. Standards

Old Bell Toptex Motorcycle Helmet. The helmet is gray. This is in as found condition but there are chips and scratches from normal use. The black rubber has some chips and cracks. The strap has some cracks. The size is marked 7 3/8. The label marked 1962 Bell-Toptex. This would be a nice display helmet.

Safety and Moped Helmets

By: Gary Nolan

Although mopeds are not in the same class of motor vehicles as scooters and motorcycles, safety should always be of paramount importance. There are many states in the U.S. that do not have helmet laws in force; however, riders of mopeds should always wear a helmet. Helmets have been proven, over the years, to provide the most effective protection for riders. Statistically, motorcycle, scooter and moped riders wearing helmets who are involved in even minor traffic accidents fare better than those riders without helmets.

Mopeds are motorized bicycles and can travel at much higher speeds than your average bicycle that is not motorized. Original mopeds were standard bicycles, with pedals, that featured a motor to assist the rider in moving forward. Today's moped standards vary to include any motorcycle type vehicle with an engine displacement of 50 cubic centimeters or less. Mopeds are often allowed to be driven by riders younger than the legal driving age and are also restricted to a maximum speed of 30 miles per hour.

Standard bicycle helmets may not provide full protection from head injury in a moped accident. In countries where moped riders often fail to use moped helmets, or use them properly, the rate of fatalities for traffic accidents is extremely high. Safety when riding a moped should be considered the same as if riding a motorcycle. Moped riders should always wear a moped helmet, should always assume drivers do not see them and will not stop and moped riders should always stay to paths and streets they are designated for. Keeping away from high speed driving locations with regular traffic can go a long way toward avoiding accidents with other vehicles.

Moped helmets are offered by several different manufacturers and dealers and are usually specifically designed for riders on mopeds. Helmets will differ from a regular motorcycle helmet in design and should be fitted to the individual rider and the location they will be riding in primarily. Moped helmets provide riders with a margin of safety when involved in a traffic accident with another vehicle. Even low speed accidents have been the source of debilitating or fatal head injuries for moped riders not using moped helmets.


Author Resource:->  Gary Nolan is a freelance writer. You can find a wide range of moped helmets including vespa moped helmets, Momo and Aprilia Moped Helmets

Article From ArticleSlide.com

Start Your Motorcycle's Engine, Put the Helmet or The Doo Rag and Lets Race The Wind

By: Gordon Petten

There are various types of motorcycle helmets available in the markets and the main purpose of a helmet is to protect the rider from head injury. The well-known and leading motorcycle brands that are available in the market are Bolle, Nolan, Honda, Yamaha, Fox, Vega, Giro, Suzuki, Acerbic, Cobra, Jones and the Icon.

Motorcycle helmets were introduced to cater for safety of the rider on roads. Wearing of helmet is compulsory in most of the countries. With helmet the rider feels secured and protects him from fatal accidents.

The main parameters of helmet are proper ventilation for cooling, technical make, light in weight and design and the shape along with the style. The types of motorcycle helmets include flip up motorcycle helmet, open face helmet, half helmets and the full-face helmets. Nowadays, helmets are available for all types of riding events such as snowmobile events, dirt bike motorcycle events and for automotive motorcycle events.

While choosing a motorcycle helmet, one needs to consider many factors that enable you to select good helmet. Some of the important factors are as follows.
• The color of the helmet should match with your motorcycle; otherwise the different combination will look odd.
• The motorcycle helmet should be of good quality and made of strong sturdy material to protect your head in case of accident.
• It should properly fit and should not either over size or under size.
• The motorcycle should satisfy and be approved from the authorized government agencies.
• The motorcycle helmet should allow you see the peripheral vision so that chances of accidents are less.
• Choose such type of helmet that is bright in color so that it is visible to others in night.
• While selecting motorcycle helmets safety matters are to be concerned first and then style and color.

Doo Rags

Doo rags are as important as the motorcycle helmets. A Doo rag is a piece of fine cloth that is used for covering the head while riding motorcycles. This tying of Doo rags started in 1930 by people of Africa and America. The main purpose of Doo rags during that period was to protect chemically processed hairs. During those days, they were made from cotton or women stocking were used as a Doo rag. But now days they are made from fine quality polyester.

It is believed that civil war slaves in American culture introduced the Doo rags and it is closely related to the culture of Afro-American. The main artist that helped Doo rags to get popular is the LL Cool and Mr. Nelly as they portrayed the Doo rags in their paintings.

The Doo rags are worn under the helmets and they absorb excess sweat in summer and keep the rider's head cool. Doo rags also enable the motorcycle helmets to fit properly and do not allow moving of the helmet to from its place in case of motor racing. These Doo rags also protect your hairs from hot Sun and allow the rider to have safe ride as hairs does not obstruct the vision of the rider while driving at speed. Doo rags are available in various colors and shapes. The common color preferred in selecting Doo rag is black.


Author Resource:->  Motor Cycle Helmets and Doo Rags

Article From ArticleshmArticle.com

YOU ARE LOOKING AT WHAT I THINK IS A EARLY BELL-TOPTEX MOTORCYCLE HELMET DATED 1966, STICKERS INSIDE SHOW THAT THIS ITEM IS U.S.A.S.I APPROVED HELMET AND USED IN GROUP 1 AMA COMPETITION


THE HELMET IS WHITE AND IS IN NEAR MINT CONDITION AS SHOWN IN THE PICTURES

SIZE: 7 1/4 BY 7 3/8

Helmets Arai® Corsair V

STYLE Randy Red
SIZE 2XL
GENDER Unisex

Features:

Cheek pads have the exclusive Emergency Release Tab feature
Neckroll is removable and has additional exhaust channels to remove interior heat
Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
Newly designed side exhaust cowls exhaust heat as well as add lateral stability at speed
Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions
Brow vents now duct air into the temple area and out the side vents for maximum cooling
Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
Latest generation of Dry Cool liner has a new silver-grey color
Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
Larger bottom opening promotes ease of putting on and taking off the helmet
Newly designed shell with Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
Larger upper vent tabs make operating the vents easier even with thick winter gloves
New “I” shield and base plates exclusive to Corsair V
New “I” shield is 5mm longer on each side and provides wider field of view
New Arai “I” shield with Super AdSis shield system

An old original Bell Magnum LTD motorcycle helmet in excellent condition.


Helmet is in excellent shape but does have some tiny scratches, and some tiny marks and mars on the helmet. There are no nicks or scuffs-helmet is shiny, smooth and very reflective - it is an oldie and it really looks cool!

Choosing a DOT Approved Helmet

By: Beth Guide

I doubt the first motorcycle helmet that came out which was invented by Gottlieb Daimler in 1885 was dot approved. Well back in his day a bike was not capable of the speeds that today's bikes are. So there was likely not a need for helmets that were approved for a high impact crash. the department of transportation which is what DOT stands for did not start approving helmets until 1974 by introducing a Federal Motor Vehicle Safety Standard for motorcycle helmets.

When you buy motorcycle helmets for yourself or for a biker you know make sure that the helmet has been DOT approved. What this means is basically that the manufacturer of the helmet has submitted their product for testing and approval with the Department of transportations. Once the motorcycle helmet bears the mark DOT Approved you can rest assured that it meets the standards for safety as set forth by the department of transportation. Snell is another entity that can approve a motorcycle helmet for safety, however they are not an official government agency and therefore do not carry the weight that dot has. So next time you buy helmets make sure its dot helmet.

DOT motorcycle helmets come in thousands of variations and are made by many manufacturers, so choosing one that fits your personality and riding style should be quite easy. Helmets come in some basic styles. You have full face, half face, skull caps or beanies and flip up which are also called modular motorcycle helmets. Each have some advantages and disadvantages. For example the full face helmet is most popular with your sport bike riders however some guys that ride a cruiser will also wear these, however the cruiser crowd tends to lean towards half face of beanie type skull caps also affectionately called brain buckets.

The Full face helmet probably offers the greatest protection as well as most of these helmets come with a face shield which makes it un necessary to wear goggles. the first time you get caught in the rain wearing one of these you will be thankful you have it on. Also most of your full face models allow you to change out the face shield so you can get a tinted one for day time riding and a clear one for nights. This is really nice especially when your riding straight in to the sun.

Half face motor cycle helmets are more popular with the cruiser and chopper crowd because they allow you to get that wind in your face type feeling which the full face does not allow. generally a half face will require you to get some goggles or some sort of eye protection, however their are some models that have a built in flip up face shield.

Now the Beanie or skull cap type of helmet is especially popular with your custom chopper and cruiser crowd. I think this is mainly because they are just more suited too their bikes when it comes to looks. Even a DOT skull cap or beanie isn't going to give you the protection that a full face helmet will. However I know it looks kind of goofy to be on an outlaw looking chopper in a full face motor cycle helmet, that is why most of these riders prefer a beanie or skull cap.

Whatever type of helmet you prefer just remember it is important to at least wear some sort of helmet when you are out tearing up the streets. Also most states have helmet laws which require you to wear some sort of helmet or you get a hefty ticket.


Author Resource:->  For more information on



motorcycle helmet and



riding apparel please visit our

motorcycle parts catalog.

Article From ArticleSlide.com

Selecting the Right Motorcycle Helmet

By: Nick Dinic

Having the proper safety equipment is very important when you are operating or riding on a motorcycle. While a helmet is the most important piece of safety equipment, it will only protect you if it the right type of helmet and it fits properly. Have you ever seen a young child riding on a motorcycle wearing an adult size helmet? In the event of an accident, the helmet would offer no protection to the child's skull at all.

It is very important that you try on any motorcycle helmet to ensure a proper fit. If you decide to make a purchase over the internet or from a catalog, make sure you are able to return it for a refund if it doesn't fit well. Keep in mind that each manufacturer sizes their helmets differently. Just because you currently own a size large doesn't mean that is what you will wear in a different brand. For best results through the mail or internet, measure the circumference of your head and ask them to give you the helmet dimensions. Never purchase a used motorcycle helmet because it may have been involved in an accident and it won't protect you as it was designed to.

For the best results, try on motorcycle helmets with any accessories you will generally have while riding. For example, many women like to have their hair in a ponytail but may have it straight while trying on a helmet. If you wear prescription glasses while operating your motorcycle, then make sure you take them with you when you are trying on helmets.

A motorcycle helmet needs to fit very securely. Make sure it surrounds your entire head. The chin straps are adjustable but put them in place to ensure you can get them tight enough to fit your face shape. You should also try on the same brand of helmet in one size larger and one size smaller just to make sure you do in fact have the best fitting helmet for your head. For added comfort, consider getting a motorcycle helmet that offers air vents. You can easily slide them opened or closed to allow more air to circulate while wearing it.

You will find motorcycle helmets made from a variety of materials. For the best in safety and quality, choose one that is made from organic fiberglass and layers of carbon fibers. This combination creates a very powerful shock absorbent shell. You also want to make sure the liner features a three layer system. This will offer you additional shock absorption.

If you plan to ride your motorcycle a great deal, consider getting a motorcycle helmet that allows you to easily change the visor. This is a great option for riding during the day and the night. Make sure the visors are fog resistant and offer impact resistance.

Investing in a quality helmet that offers the protection you need while riding a motorcycle isn't going to be cheap, but it may well be one of the most important investments you make in your life. Statistics show that motorcycle riders who wear a helmet have a 35% less chance of suffering from a head injury. You can fit a helmet that fits well and even have it custom painted to match your motorcycle.


Author Resource:->  Thrill Rider is all about customer experience. Take a look at our Brisbane Scooter Hire and Gold Coast Scooter Hire. Or, to get more information about our Brisbane Motorcycle Hire. Or try out our easy going Motorcycle Mountain Tours.

Article From ArticleSlide.com

Five Styles of Motorcycle Helmet and Customization Ideas

By: Brian Benko

Now that you have your motorcycle, it's time to start shopping for the perfect motorcycle helmet. Several different styles exist, so why not check them all out before making a final choice? The helmet you choose goes a long way in showing off your personal sense of style.

Full Helmet

Full face motorcycle helmets cover the entire head. In the back, they cover down to the base of the skull and wrap around to protect the jaw and chin in the front. A plastic face shield rests over the eye and nose area and generally can be lifted to expose the rider's face.

Most full helmets come with built in airflow vents, but they can still be warm inside. They may also reduce hearing because the padding and shell covers the ears. Full helmets are the most protective type of motorcycle helmet available.

Full helmets are also one of the most popular styles for people with whom safety is the main concern. Since they cover more area, they are also the heaviest, and the most likely to cause neck fatigue.

Three-Quarters Helmet

Open face, or three-quarter (three-fourths) motorcycle helmets cover the back of the skull and the ears, but do not surround the lower chin or include a face shield. This type allows increased air flow, hearing and improves peripheral vision. Some open face helmets include a visor in various tints and colors to block out the sun.

Even with a partial visor, goggles or wraparound sunglasses may be necessary to protect the rider's eyes. Open face motorcycle helmets are as affective in rear protection as full face helmets, but not as effective in face coverage.

Half Helmet

Half helmets are similar to three quarter helmets, with the main difference being a cropped back. This type provides the minimum amount of coverage that is allowed by law in many areas of the US. Most half helmets will require the use of goggles or sunglasses to protect your eyes from wind and debris when riding.

Women's Helmet

Female riders have tons of options for head protection. In addition to traditional helmets, there are specially designed women's helmets for riders who want to look chic, polished and feminine. Women's motorcycle helmets combine style, color and flair with safety for a tough elegance. Choosing a helmet that fits your style is a great way to ride in comfort while still expressing your personality.

Children's Helmets

If your child will be a passenger on a motorcycle, it is a good idea to buy them their own motorcycle helmet. Helmets come in a variety of youth sizes, and proper fit and sizing are important for keeping your child safe from harm. It's best to visit a local helmet dealer to have an expert help you find the youth motorcycle helmet that will perfectly fit your child's head. Before buying a helmet for your child, make sure to check your local motorcycle laws to ensure that your child is allowed and properly outfitted to ride.

Custom Helmets

Any type of helmet you choose can be customized to fit your personal style. Vintage and personally commissioned motorcycle helmets are available, as well as different trends in style. Off the shelf helmets are easily customizable with decals, motorcycle stickers or airbrushing.

No matter what type of helmet you decide to purchase, make sure to check local laws before making a purchase, and always go to the store to try helmets on. If possible, wear it for a few minutes to make sure it's comfortable and the fit is right. If it is too loose, wind can enter the helmet while you're riding and pull it off your head. If the helmet is too tight, it can be very uncomfortable for extended wear.


Author Resource:->  Brian Benko at MotorcycleHelmet offers the best ideas and information about in motorcycle helmets. Visit MotorcycleHelmet for the latest on motorcycle helmets. Buy or sell your custom helmet at http://www.motorcyclehelmet.com/

Article From ArticleSlide.com

How to Know if a Motorcycle Helmet Fits Correctly

By: Brian Benko

There is no denying the importance of motorcycle helmets for the safety of riders. It is important to note, however that all helmets are not created equal. The issue has to do with more than just comfort. Two persons who seem to have the same sized head may not get the same fit from a helmet. It stands to reason that before purchasing one, a proper fit must be ensured.

Sizing a Motorcycle Helmet

Just as our heads have different shapes and sizes the padding of motorcycle helmets also varies. Differences may be based on the brand of helmet, the type of material used, and the design. With so many different types of motorcycle gear on the market, helmet sizes vary from brand to brand. There are certain pointers which will help you to determine if the helmet you want to purchase is your best fit. These are:

The first thing to do is measure your head. If you already know your hat size, you're ahead of the curve. Using a tape measure, take the measurement around your head. Start at the center of the forehead 1-inch above the eyebrows. Run the tape around the back of the head. Make sure to measure at the point at which it protrudes the most to get the best measurement. Then bring the tape measure back around to meet the end at the center of your forehead.

The helmet should have a size tag on the inside. Try to match this to the measurement you got with the tape measure. Even after finding a helmet with the right size, the fit may not seem right. Depending on the brand and style you may have to go up or down a size to get the right fit.

Test for Fit

When you choose a motorcycle helmet, make sure that the top edge at the front is above the eyebrows so it doesn't obstruct your vision. The padding should rest just on the bone that supports your eyebrows. Shields and visors should not obstruct vision in any way.

Using your hands, rock the helmet back and forth to see how much play it has. Also repeat the movement from side to side while keeping your head as steady as possible. It should be reasonably snug but not too tight. Be sure to use a mirror when doing this as this will give you a better sense of how well it fits.

Fasten the chin strap and try to lift the helmet off. If it come off then this clearly means that you could be in trouble in the event of a collision. Try going down a size and then repeat the procedure. A properly fitting helmet should not be removed once the chin strap is fastened.

Shop Online for Motorcycle Helmets

Some people choose to buy their motorcycle helmets online. While there is nothing wrong with getting motorcycle gear from websites, buying helmets can be a hit or miss situation. Any website you want to purchase form should have a size chart which will make the process much easier. Even so, there is still a small chance of getting the wrong size since you won't be able to try it on.

When buying your first motorcycle helmet, the tendency may be to go for a slightly loose fit. Some people find the initial snug feel a bit uncomfortable. Remember that there is a breaking in period, and after a while you will get used to the feel of the helmet. Your choice of helmet will also depend on your motorcycle.

For high speed bikers, the only real option is a full face helmet. With its protective visor, your eyes and face will be protected from bugs and debris. For off-roaders the motocross or off-road helmet is the best option.

Half helmets are generally considered suitable for short distances. The downside to this option is that it can come off in a collision. Motorcycle safety is an important issue, and every rider must take the appropriate steps to protect themselves in the event of an accident.


Author Resource:->  Brian Benko at MotorcycleHelmet offers the best ideas and information about in motorcycle helmets. Visit MotorcycleHelmet for the latest on motorcycle helmets. Buy or sell your custom helmet at http://www.motorcyclehelmet.com/

Article From ArticleSlide.com

Customize Your Motorcycle Helmet to Reflect Your Style

By: Brian Benko

Nothing compares to the thrill of the open road. A motorcycle ride is one of the most freeing, relaxing and exhilarating experiences a person could ever imagine. Not all bikes are created equally. Some bikes are made for speed while others are built for comfort and long rides.

Riders are just as varied as the bikes they love. Where one rider may enjoy the speed and thrill of the ride, another may prefer cruising and enjoying the scenery. No matter what type of rider you are or the gear you prefer, your helmet is the most important consideration in terms of safety.

Motorcycle Gear

Most motorcycle gear looks the same. Leather jackets, pants and gloves come in a variety of colors and styles but are rarely fully customizable. The most you can do to customize your motorcycle gear without having it custom made is add decals. Helmets on the other hand can be fully customized very easily.

Customized Motorcycle Helmets

Helmet customization allows each rider to express their own sense of style or to take pride in something. For years, bikers have participated in extensive rides to raise money for children's charities and other important events. The money they've raised has saved many lives and gone a long way in promoting research for certain causes.

Some bikers sport customized helmets that reflect their achievements and the causes they promote when they ride. Pink, blue and yellow ribbons often adorn helmets when bikers are riding to support cancer research or military troops overseas. Some bikers simply like to show off their artistic flair.

Helmet Customization Ideas

State Colors: Show off the pride you feel for your home state or country with a helmet that displays the flag or colors that represent it. State mottos like "Sweet Home Alabama" or "Virginia is for Lovers" are great ways to show your support for your home state. Murals enhance the overall look of the helmet.

Names: Tattoos are a great way to show your love and dedication to someone. If you're the type of biker who would rather avoid needles, have the name of your love or your children painted on your helmet. People understand the love and pride a biker has in their helmet.

Airbrushed Murals: Bikers often have murals painted on their motorcycle. Consider an airbrushed mural that includes your motorcycle gear and your helmet. Bright colors also make the helmet more visible during the day and at night.

Memorial: Pay a wonderful tribute to someone special by painting a memorial message on your head gear. Airbrushed photographs and poems are a beautiful way to remember one you've lost and share valuable information with others you come across. After all, a picture paints a thousand words.

Fantasy: Fairies, wolves, skulls and dragons are the most commonly used fantasy characters for motorcycle gear. A great artist can capture the exact image you want and transfer that character to your motorcycle helmet.

Motorcycle Laws

Only four states in the United States have no laws regarding head gear for motorcyclists. Most states require helmets for all riders over the age of 16. Eye protection is also required in most states and should be taken into consideration for the safety of the rider. Bugs and debris can fly into the rider's eyes and cause serious injury or accidents leading to injury.

Proper head protection and eye protection should always be seriously considered by everyone planning a trip on a motorcycle. Double check your state's motorcycle laws to make sure you're riding within the law. It's always better to be safe than sorry.

Some states allow earphones so you may listen to music or use your cell phone while riding. Cell phones should always be on auto-answer with a reliable earphone to minimize the attention they require. If you're unsure about your state's laws, contact the local department of motor vehicles or a law enforcement officer for details.


Author Resource:->  Brian Benko at MotorcycleHelmet offers the best ideas and information about in motorcycle helmets. Visit MotorcycleHelmet for the latest on motorcycle helmets. Buy or sell your custom helmet at http://www.motorcyclehelmet.com/

Article From ArticleSlide.com

Four Tips on How to Choose the Perfect Motorcycle Helmet

By: Brian Benko

Whether you're in the market for your first motorcycle helmet or just for a new, updated version, many factors exist in finding the perfect choice. Comfort, safety, convenience and fit are all important when choosing motorcycle gear. After all, the safest motorcycle gear you can buy is the gear you will wear.

The Perfect Fit

One of the most important steps in choosing a helmet is trying it on for size. Effectiveness and safety are largely dependent on making sure the fit is correct. Make sure that the helmet fits snugly. If you find a style or design you like, but the fit is not quite right, ask about other padding options. Many times, you can adjust the fits by adding or changing padding inside the helmet.

When judging fit, also to pay close attention to the chin strap. The strap should fit comfortably. It should be tight, but not uncomfortable, around your ears and under your chin. The strap should be adjusted so that the helmet doesn't shift back and forth or from side to side on your head.

Your motorcycle helmet should sit low on the forehead, with the edge just above the eyebrow. If you're not sure if it is sitting correctly, have a salesperson or experienced friend look at it for you. When shopping for your first helmet, consider a visit to a specialty store where employees can help you figure out the best fit.

Ride in Comfort

An uncomfortable motorcycle helmet can totally ruin your riding experience. The best way to find the most comfortable fit is to try on multiple styles before making a choice. With something designed to fit so tightly, comfort can be tricky, but is also very important to making your rides pleasant and fun. Don't be discouraged if it takes visiting a few stores to find the right fit.

Several factors contribute to helmet comfort. Make sure the padding is soft and in constant contact with your head. The padding should create a solid seal around your ears that doesn't cover the entire ear. It should also feature a neck roll that cradles the back of your head.

A good fitting helmet may seem tight when you try it on and try to shift it on your head. There are foam shells inside that seal out wind and noise which are smaller than the actual shell. You never want a helmet to shift around on your head, snug fitting helmets help prevent neck injuries.

Safe and Sound

Comfort is important, but safety should be your top priority. In the US, there are only four states that are 100 percent free of motorcycle helmet laws. Twenty states have full motorcycle helmet laws, and 19 more have laws for riders over 18.

One way to make sure you're complying with the law is to purchase head gear that is DOT approved, or that meets a standard like the Snell certification. The Snell Memorial Foundation is a non-profit organization that helps develop and test safety standards. By considering these guidelines, you will ensure your head gear is reliable and tested.

Another way to get information is to search for reviews online or in magazines and learn about the motorcycle helmet crash tests. Ask experienced riders about their head gear of choice and why they chose it as their favorite. Extensive research will help you make the most informed decision possible.

Considering Cost

"You get what you pay for" is a common saying for a reason. In choosing a motorcycle helmet, it's best not to just go for the cheapest option you can find. Instead of looking for the least expensive, search for a good deal. Decide before making a choice what your price range is, then look for the best helmet within your price range.

Do your research. Try several on for fit, and consider investing the maximum amount you can afford. An investment in a good motorcycle helmet is also an investment in your enjoyment and safety.


Author Resource:->  Brian Benko at MotorcycleHelmet offers the best ideas and information about in motorcycle helmets. Visit MotorcycleHelmet for the latest on motorcycle helmets. Buy or sell your custom helmet at http://www.motorcyclehelmet.com/

Article From ArticleSlide.com

The Importance of a Good Motorcycle Helmet

By: Brian Benko

Anyone who decides to get a motorcycle must understand that a helmet is probably the most important safety consideration. The fact that riders are more vulnerable in crash situations is obvious, but crash statistics paints an even grimmer picture. Despite repeated warnings and horrible stories of crash victims, many people still fail to realize the importance of wearing a good helmet.

Head injuries are the most prevalent cause of death in motorcycle accidents. In cases where the rider was without a helmet, the death or injury could have been prevented by the fact that the helmet absorbs much of the force of impact. The issue has gained so much attention that governments have gotten involved. Now most countries have laws requiring motorcycle riders to wear helmets.

How a Motorcycle Helmet Works

The majority of motorcycle helmets are constructed from plastic. They are designed with special crumple zones which absorb most of the shock on impact. The more expensive helmets are usually made a combination of carbon fiber and Kevlar.

The interior of the helmet is padded to help it fit more securely and to offer added protection. In the event of a collision, helmets are designed to crack and break in certain areas because of the shock they absorb.

Types of Helmets

The helmet a rider chooses will depend on certain factors which include the type of motorcycle, weather conditions. Other considerations include whether it will be used for sport, and the type of sport. Motocross helmets are designed differently than other racing helmets.

There are helmets which were not specially designed for motorcycle safety which are worn by riders. The types of helmets which are specially made for motorcycle riders are:

Full Face Helmet: This provides the best coverage for the head and face. The face shield protects the wearer from debris and insects that could disrupt the rider's concentration. It also prevents injury to the face and head in the event of a crash.

The Modular Helmet: This is also referred to as the flip up because the front portion can be pivoted upwards. When closed it resembles the full face design.

The Motocross: This is a specially designed helmet for those who ride dirt bikes. It has extra protection for the chin area and a visor. Because it has an open face design, it requires the wearing of goggles for full protection.

The Open Face: This type of helmet covers the head but has no chin bar or protection for the face. Riders can wear goggles for protection from debris but it can also be fitted with a face shield.

Half Helmet: This offers very little protection in the event of a crash. In fact it is only recommended when travelling for short distances. Dust and other debris can still affect the rider even with the use of goggles.
Motorcycle Safety

There are other tips to remember for motorcycle safety. If your helmet has protected you in a crash it is recommended that you discard it. This is true even if it appears undamaged.

Riders who wear full face helmets with tinted face shields should consider getting a different helmet for nighttime riding. The darkened shield can obscure your vision at night, increasing the chances of an accident.

Many deaths resulting from motorcycle accidents are caused by head injuries. As such, the helmet as a protective device and important piece of motorcycle gear cannot be overstated. There are many designs available which should suit even the most discerning riders.


Author Resource:->  Brian Benko at MotorcycleHelmet offers the best ideas and information about in motorcycle helmets. Visit MotorcycleHelmet for the latest on motorcycle helmets. Buy or sell your custom helmet at http://www.motorcyclehelmet.com/

Article From ArticleSlide.com

Belfast Motorcycle Safety Hints And Tips
By: Tom Jones

Driving motorcycle can be fun. But, it is equally important for all the motorists and riders to be very careful and cautious while riding the bike. Below listed are a few tips that should be followed by all the motorists and riders:

1.Choose quality: It is always better to go in for quality than looks. Therefore, it becomes quite imperative to go in for the best and the quality parts for your motorcycle that are affordable by you. There are quite a few reasons associated with it. Firstly, any part that you replace for your motorcycle is extremely important for it. Secondly, you will not gain anything by saving a few extra pounds by buying cheap and potentially defective parts. Never try to compromise on the quality. This is very important, as this concerns your own personal safety. You should not wait for the circumstances to prove you this quality aspect, as these circumstances could potentially prove to be fatal.

2.Keep Safe: It is very important to protect yourself from head to toe by using protective apparels and gears. These mainly include boots, socks, trousers, eyewear, vest, gloves, jacket, and last but not the least motorcycle helmet. Always ensure that these products that are bought by you are of good quality and, at the same time comfortable and durable, so as to withstand all the momentum and pressure while riding. It is very important for you to understand that you should never compromise on the quality as the result can be quite surprising and alarming for anyone.

3.Repair and maintenance: If there is any problem occurring with your motorcycle, it has to be checked and rectified instantly. You should also ensure that your motorcycle goes for regular maintenance and services. Whenever you plan for any adventurous trip, it is very important to get your motorcycle checked for any kind of defects or leaks and get them repaired at the earliest to avoid any further issues. It is quite essential for you to check all these aspects without any delay in time and with complete diligence. Besides this to make sure for the safety and condition of your motorcycle, you should go ahead with all the necessary regular repairs.

4.Be prepared: Always ensure that you keep the tank full of your motorcycle at given point of time. As a matter of fact, there should be enough fuel in your motorcycle to carry you to your destination.

In case of any compensatory situation, your insurance will take care of all the necessary damages and payouts and save you from any kind of big losses. It is very important for us to understand that everything that we do is a compromise. As a result, it becomes quite important for us to understand all the implications fully and be very careful. Safety is the most important aspect for anyone in this world, particularly if they ride in major cities such as Belfast motorcycles need to be in good working order at all times.


Author Resource:->  Charles Hurst Group offer a wide range of Belfast Motorcycles

Article From ArticleSlide.com

The Safety Standards of Motorcycle Helmets

By: Alex De Mostafa

In 1972, The National Highway Traffic Safety Administration (HHTSA) set about creating new minimal safety standards for motorcycle helmets. Federal Motor Vehicle Safety Standard 218, commonly called the DOT (Department of Transportation) standard, was initiated and signed into law. The act marked the culmination of years of review and analysis. The DOT standard was revised slightly in 1974 and has subsequently undergone other minor alterations, but basically has remained unchanged for more than 30 years.

The purpose of DOT standard 218 is to identify helmets that comply with government standards for helmet safety. It should be noted that motorcycle helmets are not required in some states and that while the Federal Government has set safety standards, there is a general lack of enforcement and oversight by the program. Basically, the government has established outdated safety standards and relies on the manufacturers to comply and attest to their compliance with these standards. Based on the manufacturer's representation, a DOT stamp of approval is placed on each helmet.

This is not to say that the government does not test helmets. Each year, DOT provides token testing and presents manufacturers with the results. However, in 2001, the government inspected just 40 helmets. The Department of Transportation relies almost exclusively on the helmet manufacturers to meet the safety standards. As government-testing requirements are minimal, motorcyclists have long expressed concern over the safety of helmets.

The DOT standard for testing requires that helmets be tested twice at four different impact zones. DOT approved helmets are dropped from a 6 foot height onto a flat anvil and then again from a 4.5 foot height. The manufacturer is required to sign off on compliance with these standards prior to applying the DOT emblem to the helmet. However, in the 40 unit testing performed directly by DOT in 2001, 20% of the helmets failed the test.

In the motorcycle helmet industry, more stringent safety requirements are applied by the independent Snell Standards set by the Snell Memorial Foundation (SMF). The Snell Memorial Foundation is a not-for-profit organization dedicated to advancing motor sporting helmet safety. The foundation was established in 1957 in memory of racecar driver William Peter Snell and has since served as the recognized leader in safety standards for a variety of sporting helmets. Unlike the Department of Transportation, the SMF aggressively and randomly tests many motorcycle helmets each year.

SMF maintains two testing facilities; one in the U.S. and another in England. Manufacturers, who subscribe to the Snell standards, submit their helmets to the organization for recognized certification. These helmet manufacturers agree to periodic testing and agree to comply with the more current Snell safety standards for motorcycle helmets. Snell safety standards are not exclusive to the motorcycle industry and are used for harness racing, other equestrian sports, cycling, skiing and snowboarding.

While the DOT standards have been virtually unchanged since 1974, the SMF standards have been updated every five years. Additionally, the Snell testing procedures are much more aggressive. Whereas DOT tests use drop elevations of 6 feet and 4.5 feet respectively, the SMF utilizes 10 foot and 7.5 foot drop elevations.

Both DOT and Snell acknowledge that it is rarely the fall that damages the head. Rather, it is the sudden stop. To measure the effectiveness of the motorcycle helmet in coping with the stress of a sudden halt, both testing programs utilize an accelerator set inside the headgear.

The Snell tests do not leave interpretation of the results to the manufacturer. These more strenuous tests focus on the manufacturing quality of the motorcycle helmets. As a result, the Snell method of testing does not use the flat anvil, but rather an edged anvil that is designed to further test the helmet's material construction.

Cyclists who use helmets bearing the Snell label of approval are assured of helmets that not only surpass the DOT safety standards, but have undergone independent testing and whose manufacturers have made assurances of strict compliance. The Snell certificate of approval goes a long way with consumers and industry experts. The Snell label on the back of the helmet is the industry symbol for safety design and structural integrity.


Author Resource:->  Savin Scalp Helmets.com your one stop shop for motorcycle and novelty helmets of all shapes and sizes. We provide a wide selection of affordable novelty, half or full face, and motorcross helmets. Our brands include Voss, Caliber, Daytona, Hawk, Outlaw, Bell, and Rhodia. Visit us online today at www.savinscalphelmets.com for more information.

Article From ArticleSlide.com

Ten Things to Consider When Purchasing a New Motorcycle Helmet

By: Alex De Mostafa

Whether you are a new cyclist, getting your favorite rider a new helmet as a gift, or an experienced rider considering a change of headgear, there are a few basic issues to consider before you purchase your new motorcycle helmet.

1.) Does it pass the safety tests? - That snazzy new brain bucket may look good, but it'll be of little use if it doesn't meet certain safety standard regulations. The US Department of Transportation requires that all helmets meet certain standards, such as impact absorption, penetration prevention and strap stability. When a helmet is manufactured to meet these standards, the DOT puts a neat little sticker right on it (or the box) declaring so. A DOT certification should be the minimum standard to look for.

2.) Does it pass the roll off test? - Your helmet should not be so loose that you can roll it off the front of your head when it is properly fastened. To perform a roll-off test, secure the helmet to your head. Grasp the back of the helmet and try to pull it forward over your face. If it comes off, even though it hurts your ears in doing so, the helmet is not a proper fit or style for you.

3.) Does it stay put? - To check the fit on your helmet, as quickly as possible shake your head as if trying to touch your ear to your shoulder, from side to side as if saying a big "No" and from back to front touching your chin to your chest. If the helmet stays in place, it fits. If not, either look for another helmet, or see if there's a way to make yours fit better. Many helmets come with advice for giving them a snug, safe fit. Your dealer may be able to help, too..

4.) Is it comfortable? - Now, some riders will tell you that there is no such thing as a comfortable helmet. We'll not debate that here, but we will say that the more helmets you try on, the better your odds of finding one you like. Full-face motorcycle helmets are considered more comfortable by most riders who have tried them. Comfort levels increase with the quality of the brand and the cost of the helmet, too. The things to avoid are squeezing of the ears, pressure at the crown and/or forehead, and any general "hard points" in the helmet. Visit several dealers or shops. Try on lots of different brands and models. Put them all through the roll-off and head-shake tests, too, to ensure that fit and safety are a factor as well as comfort. Leave a helmet on for 15 minutes or so, to allow it to "settle" on your head. Next to your saddle, it'll be your biggest source of comfort or discomfort while riding.

5.) What's it cover? - Full-face helmets are considered the safest and most comfortable of the lot. Flip-face, modular, or system motorcycle helmets are a good marriage between the open-faced models and the full-faced ones. Open-face models can expose the rider to facial injuries in a crash, and studies have shown that riders who suffer facial injuries are 3 times more likely to suffer brain injury, as well. When considering a new helmet, remember that one day your chin could be bouncing off the pavement.

6.) What about the face shield? - It should seal the helmet all the way around the edges to prevent wind leakage. It should have VESC - 8 and ANSI Z - 87 safety standards, usually molded right into it. It should be easy to operate, raising easily and staying up without dropping. Look for any sight-distorting imperfections. Most shields offer UV protection to some degree. A tinted face shield might be a good addition, for those really sunny rides.

7.) Any convenience features? - Does it come with a storage bag? Does it have an extra face shield? How easy is it to change the face shields? Will the strap end stay where it's supposed to or is it going to flap in the wind? How easy is it going to be to remove and wash the lining? Take your helmet for a test drive. Attempt to change the face shield. Mess with the strap. Take the lining out. Short of dropping it from the roof to test its scratch resistance, see just how many convenience features your helmet has, and whether or not they are really convenient for you.

8.) Any comfort features? You thought we'd already discussed comfort, hadn't you? Well, there are things that can make a helmet more comfortable like vents, padded straps and variable thickness inner padding. What one rider may consider comfortable, another might find constricting.

9.) Looks? Everybody wants the coolest looking dome on the street, but beware that the more graphics and colors used increases the price significantly. If you find one that passes all your criteria for the "perfect" helmet, but it's astronomically priced, ask if its available in a solid color. If you plan on custom painting, your best bet is solid white. The brighter the color, the more other drivers will notice you, so you may want to consider red, yellow or even orange. Some motorcycle manufacturers offer limited helmet color schemes to match each year's bikes. Some helmet companies do, too.

10.) Cost? So, your quest has led you to a helmet with a price tag so high it's going to drain your bank account. What now? Well, take note of the bit above about graphics. Try to negotiate with your dealer. He's invested a lot of time into you, helping you try on different helmets, get the right fit etc. It may be worth it to him to lower the price a bit. See if you can get a slightly less-tricked-out model. Don't sacrifice comfort or safety for the sake of a few bucks, but if you can afford a less-expensive model with fewer convenience features, go for it!

You may actually put more time and effort and energy into buying your new helmet than you did your bike. But it'll be worth it in the long ride.


Author Resource:->  Savin Scalp Helmets.com your one stop shop for motorcycle and novelty helmets of all shapes and sizes. We provide a wide selection of affordable novelty, half or full face, and motorcross helmets. Our brands include Voss, Caliber, Daytona, Hawk, Outlaw, Bell, and Rhodia. Visit us online today.

Article From ArticleSlide.com

The In And Out Of A Carbon Fiber Motorcycle Helmet

By: Corey Palmer

Some of the most modern and popular motor cycle helmets on the market today have to be the ones made of a material called carbon fiber. The technology now available in the making of motorcycle helmets and other protective wear means we are getting better quality, better protection and more comfort.

Carbon fiber is made from small threads of carbon filaments which are sewn or woven into other fabrics such as felt. These carbon fibers are also used to make up the hard shell or protective part of the motor cycle helmet. What results is a strong and light helmet that is both comfortable to wear and will help save your life.

These helmets are made in a way to make you feel cooler than a regular helmet which is really nice on a hot summer day on the highway. Some also feature anti-fog options as well if you plan on using a face mask and may be driving in fog or other hazy weather. These helmets are designed to make sure there is no obstructed view as well.

Because of the way that these carbon fibers are manufactured, the results are of better strength and hardness. Some could actually say that these become as strong as some metals without having to deal with all the weight that would be involved with metal.

To make a carbon fiber helmet even more durable and protective, sometimes they are mixed with kevlar. When you combine kevlar with carbon fibers, you end up with something with the strength of three times that of kevlar.

It is also important to note that carbon fiber helmets for motorcycles are usually approved by the Department of Transportation or DOT. You will definitely want to make sure that your helmet is legal to use on the road. It would be a shame to get pulled over and find out the hard way with a ticket or worse.

If you are looking to buy these types of carbon fiber helmets, at the moment they are mainly available through custom bike shops. However, more and more regular shops are beginning to keep these in stock as they become more popular. Soon you will probably find these everywhere!

Carbon fiber helmets and other equipment goes to show how far technology has come in the motorcycle and protective garmet industry. There are a huge variety of different models and styles to choose from so get shopping!


Author Resource:->  Corey Palmer is a motorcycle enthusiast and shop owner. Check out some carbon fiber motorcycle helmets, carbon fiber sheet and carbon fiber tube.

Article From ArticleSlide.com

Scorpion Motorcycle Helmets

By: Dona Rosa

Do you love to go biking? Do you own a nice manly motorbike? Missing something a helmet maybe?
We all know it s rather nice a feeling when you are riding that bike and the wind flows through your hair, but if you weren t aware, we d tell you, it s at a great risk that you do so. Buy a helmet, even if it s expensive, because in the end, it might end up saving you from mind boggling hospital expenses.

Well, ever ended up looking for cheaper helmets without the DOT label of approval? Those are just junks since they are flimsy and won t be able to save lives! Learn to compromise and learn that money can buy you safety. Look around and we re sure you ll get one that suits your needs. Read on to find out more about Scorpion motorcycle helmets...

So what do Scorpion Helmets have that other brands don t have?

One motorcycle helmet you can rely on is the Scorpion motorcycle helmet. Why? The prices are affordable and the quality is the best you ll get in the market. Scorpion manufactures products that are mainly helmets. They use the best designers in the business to design those motorcycle helmets so they are as good as custom made ones! The materials used are highly durable and of the highest quality and several special processes are used to produce things that ll not only last longer, but also be within the safety levels and standards.

Scorpion manufactures entire helmets themselves, without allowing any outsourcing or subcontracting. The helmets are all produced and made to last, in their own plant, therefore, each step in its making is carefully monitored and kept under strictly controlled conditions to yield the finest helmets you ve ever worn!

So how do they make them?

Most helmets these days are manufactured so that they don t break or shatter on impact. Scorpion uses Kevlar matrix shell or fiberglass. There s a DOT label or Snell 2000 certification lined on the chin bar, which allow you to check for authenticity. These helmets are seriously a great buy. If you want to know one other further feature that ll make you go Wow we ll tell you about the anti fog functions that Scorpion motorcycle helmets boast.

The Scorpion helmets are manufactured mainly in China but are designed and inspected in the United States. The inner layering of the helmets is made of the highest quality fabric. The fabric absorbs the moisture from the forehead and the in built ventilation system allows air to flow freely so that you don t suffocate. This ll keep you cool and fresh.

Characteristics of the Scorpion that Put Them a World Apart from the Rest

The helmet is a bit heavy when compared to other ones, but it s always worth it, especially when you look at the safety features you are being offered. When you wear it, it should fit you perfectly and be sealed properly. How do you realize if it s been sealed correctly? Well, there ll be good drop in the ordinary levels of sound when you re cruising.

You should feel satisfied and assured that when you buy a Scorpion helmet, it s the world s best motorcycling helmet! It s really worth the money! Of course, if you want to make it last, you have to make some efforts to maintain it.

Get a pair of great motorcycling boots to go with that helmet, and be the center of attraction, even on the roads!


Author Resource:->  For more info, visit: http://www.rockytopleather.com/ Rocky Top Leather and see what fine goods they have there like a nice new http://www.rockytopleather.com/categories/mens-motorcycle-boots motorcycle boots for you!

Article From ArticleSlide.com

How To Choose Motorcycle Protective Gear

By: Jay Gaulard

Riding a motorcycle is one of the more exhilarating methods of traveling, but it's also more dangerous than being in a car, especially if you don't have the right protective gear. You can significantly reduce the risk of severe injury if you take the time to pick out some safety gear to wear while on your motorcycle.

There are a lot of different options in protective gear, so it's a good idea to know what you're looking at. Here, we'll go over some of the more popular types of protective gear to help you make the right choices and get the gear that will best protect you.

Helmets

The variety of motorcycle helmets on the market is staggering. Aside from the visual factor, choosing a helmet that you like the looks of, there are a few other things to keep in mind. Size is very important. Your head should fit snugly within the helmet. If you can slip it over your head, then it's too big, it should need to be pulled on. The soft foam inside will form to fit your head as you wear it, to provide greater protection.

Look for a helmet that starts right above the eyebrows when on. Anything higher up will not give adequate protection. You have a choice between a full face helmet, which offers the best protection, a three quarters helmet and a flip up helmet, which allows you to move the faceplate up to expose the face. This last one may be more expensive, but it does offer the advantage of being able to simply lift the faceplate rather than remove the entire helmet to speak or drink something.

Gloves

There are two main reasons to wear gloves while riding. The first is to keep your hands warm, particularly while riding during winter, when the icy wind can quickly numb them and prevent the proper sensations needed to control the motorcycle. The second is protection should you take a tumble. Fingers and the flesh on the hands are very fragile and you need as much protection as possible.

The best gloves for motorcycle riding include Kevlar pads on the backs, with extra grip on the palms for maximum control. You will probably need a lighter pair for summer use and heavier ones for winter, or opt to wear a light pair of cotton gloves under the Kevlar ones.

Boots

When shopping for boots to use on your motorcycle, keep in mind whether you'll need to walk or not. The best protection comes at a price, limited mobility. If you'll be walking as well as riding, then look for heavy duty boots that are built for cross-country endurance. These will give strong ankle support and have thick, resistant soles to protect your feet should an accident occur.

For motocross riding, consider using specialized boots that protect as much of the leg as possible, with rigidity. These are definitely not practical for walking in, however, so keep that in mind.

Pants

There is much more to your body than simply head, hands and feet and it pays to protect the rest of it as well. Your legs will be at risk, as they are so close to the bike, so proper pants can help protect them.

Finding a pair of pants that looks good, is comfortable to wear in summer and still provides enough protection for sliding across the road is next to impossible. It really all comes down to what type of riding you'll be doing. For the riskier rides, Kevlar padded pants are probably your best bet. These usually come with extra pads on exposed areas like the knees which aren't exactly visually pleasing, but do offer extra protection.

For more formal rides, there are now jeans with Kevlar fibers woven into them that provide extra protection should you be dumped off the bike. Other options include leather pants and motocross pants, both of which tend to be quite hot in warmer weather. You may also opt for leather chaps, which cover and protect the legs, but allow for maximum movement.

Jackets

Choosing a good jacket is also very important. This is what will keep your torso and arms protected. You'll find that there are two main options, synthetic and leather. Each has its advantages and disadvantages.

Leather jackets tend to be well built and last for a long time, decades, even. They are the classic protective wear associated with motorcycles, so many more traditional motorcyclists prefer leather. These tend to be quite protective and are made more so by protective pads sewn to the inside of the jackets. However, they aren't very reliable under rain and tend not to protect as well as synthetic from the cold. The darker colors of leather tend to prevent visibility, which can be an added danger, particularly in the evening.

Synthetic jackets are usually more expensive, but offer better protection. Unfortunately, despite the higher protective rate, they tend to wear out faster than leather. Synthetic fibers make these jackets warmer in the winter and ensure that they are completely waterproof, which is a major bonus if you are planning on a long trip. The brighter colors of synthetic jackets also mean that you will be more visible on the road.

Choosing your protective gear for motorcycle riding is one of the most important steps you can take toward staying safe. Make sure that you take the time to research and try the various types of protective gear. Everything should fit well and be comfortable, but still offer the highest level of protection possible.

No one wants to think about having an accident, but these things do happen and with a motorcycle, you simply don't have the same protection around you as you would in a more substantial vehicle. That doesn't mean taking unnecessary risks is required, however. There is plenty of gear that can be used to keep your body and skin intact as you enjoy riding.


Author Resource:->  Jay Gaulard writes for a wide selection of websites on various topics. He is a veteran of the internet and has come to be respected in his many areas of expertise. This article was written on behalf of MyCycleMarket, a popular motorcycle parts and accessories website.

Article From ArticleSlide.com

Motorcycle Helmets A Primer
By: Dona Rosa

Around a century back, bikers did not have to worry about their health and well being while driving motorcycles. This was because of the fact that the bikes they rode lacked in both features and power. When the first motorcycle was built in about 1885, no one cared about accidents and the injuries resulting from them.

Once better automobile engineering techniques and equally better resources were available, the motorcycles started increasing speed. Results were that the fatality rate of motorcycle riders rose with the advent of faster motorbikes.

A high number of deaths resulting from motorcycle accidents lead to an urgent need for the motorcycle helmet. Hence, the first commercial motorcycle helmet was made in 1953 by a professor from the University of Southern California. One of the main reasons stated behind this was because Harley Davidson and Indian Motorcycles were going to create motorcycles for the riders who wanted the thrill of speed.

Head Protection

Protecting the head when one rides the motorcycle is very important. A motorcycle helmet is one of the most important requirements of safe driving and mostly precedes all other safety gears. Its need increases especially when one considers the statistics where motorcycle fatalities are cited as being one of the most dominant causes of brain injuries today.

Many riders due to various reasons, physical or psychological, tend not to wear motorcycle helmets. However, it is advisable for them not to sustain this habit as this could lead to dangerous consequences.

Note: it should be appreciated that many countries have stepped in to make wearing a helmet mandatory by including it in their law. It is advisable for both the drivers as well as any passengers to wear helmets.

About Helmets

In case of an accident, the impact is absorbed by a motorcycle helmet. One of the first things that one should look for in a helmet is the material of the helmet. A helmet should ideally be lightweight and tough.

Today, crack resistant fibers and high grade plastic have made the helmet manufacturing processes very easy and efficient. Motorcycle helmets should have high impact resistance and high quality.

While buying a helmet one should remember that the money spent on a helmet is worth its benefits. A helmet that does its job is always worth more then the money spent on it.

While buying a helmet, the next important thing to remember is the comfort that the helmet provides. Today markets are filled with many types of helmets; the full faced helmet is the safest option and should be preferred over other types. One could also choose the half face helmet which offers a good protection and gives a wider view of the road.

Along with having a tough body, helmets should ideally carry a clear visor that can shield the face and eyes from wind as well as dust. A helmet should fit properly, cover the full face, feel soft and itch less at the places of contact, and be of sweat absorbing material on the inside. The choice of color, stickers, and graphics depends entirely upon an individual.

Today helmets are available in many shapes and sizes according to your requirements. Many branded helmet manufactures have incorporated facilities like ventilation systems, and anti fog visors, while keeping in view of not hindering the biking experience craved by the bikers.


Author Resource:->  For more info, visit: http://www.rockytopleather.com/ Rocky Top Leather and see what fine goods they have there like http://www.rockytopleather.com/categories/motorcycle-helmets men's helmets

Article From ArticleSlide.com

How To Avoid Brain Injuries To Your Child

By: John Myre

Tommy now had the coolest bike on the block. It was sleek, shiny black, and made for speed. The bike came with a new helmet, but how cool was that? Girls were not impressed by helmets.

He was a dashing figure until he hit the manhole cover and flew face first into the street, knocking out his two front teeth and causing a concussion that sent him to the hospital for two days.

Today his smile is a little crooked, but he keeps his safety helmet on perfectly straight.

According to the Brain Injury Association, every year in the United States 1.4 million people are treated for traumatic brain injury (TBI) in hospital emergency rooms. About 50,000 people die each year from TBI, and 80,000 experience the onset of long-term disability.

Major causes of TBI are falls (28%), motor vehicle crashes (20%), struck by/against (19%), and assaults (11%). Alert parents need to know how to protect their children from brain injuries, and how to identify a serious injury.

Some Of The Facts

Nearly 200,000 traumatic brain injuries occur on U.S. sports fields each year. An estimated 65 percent of the injuries occur to young people 5 to 18 years old.

Repeated concussions not only impair memory and mental function over the long term, but may trigger "second impact syndrome," a sudden, fatal brain swelling.

There is no such thing as a "modest" concussion. And you don't have to be knocked out to suffer one. More than 90 percent of concussions don't involve loss of consciousness.

Experts agree that nobody who still has symptoms of a brain injury should be allowed to play again until all symptoms have cleared.

After a brain injury, the risk for a second injury is three times greater; after the second injury, the risk for a third injury is eight times greater.

Helmets First

A properly fitted helmet is the most important piece of safety equipment for many activities. For example, medical research shows that 88 percent of cyclists' brain injuries can be prevented by a helmet.

• 
  Different activities require different helmets.
  -Bicycle helmets are OK for bicycling, inline skating, skateboarding and roller-skating.
  -When around or riding horses, wear an equestrian helmet.
  -Use motorcycle helmets on motorcycles, ATVs, snowmobiles and minibikes.
  -Snow skiing and snowboarding require special helmets.
  
• 
  Only buy helmets that meet the certification requirements for a particular activity. For details on helmet selection and fitting, talk to an expert, or contact a national association for the activity or the Consumer Product Safety Commission.
  
• 
  The child should participate in the selection of the helmet. Do not buy one that a child can "grow into."
  
• 
  Never buy a used helmet! Do not use a helmet that has been dropped or involved in a collision.
  
• 
  If parents wear helmets, almost all kids wear them, too. If parents don't wear helmets, the number drops considerably.
  

In The Event Of A Brain Injury

• 
  After any fall or activity involving contact to the head, see a physician if any of the following symptoms are present: thinking problems; memory loss; dizziness; headache; nausea; sensory changes; balance, sleep or pain problems; changes in personality, mood or behavior; or trouble communicating.
  
• 
  Ask your child's teacher(s) to call you if they see any symptoms.
  
• 
  When your child leaves the emergency room or office following a brain injury, the doctor or nurse should give you instructions on caring for your child over the next 24 hours, and describe any important changes to watch for. If you do not get these "Head Sheet" instructions, ask for them.
  
• 
  The effects of a "mild" brain injury may not be seen immediately. See a doctor who specializes in brain injuries right away if you notice these changes in your child:
  -severe headache that does not go away or get better.
  -seizures, eyes fluttering, body going stiff, staring into space.
  -child forgets everything, amnesia.
  -hands shake, tremors, muscles get weak, loss of muscle tone.
  -nausea or vomiting that returns.
  

Author Resource:->  John Myre is the author of the award-winning book, Live Safely in a Dangerous World, and the publisher of the Safety Times Reproducible Articles..

Article From ArticleSlide.com

Secrets To Rocket Start a Booming Ebay Business

By: PARMOD BANSALI

For serious entrepreneurs, however, selling on eBay can be a good way to start a new business if you are willing to put in the time and energy required to make the business a success. eBay is also a good option for existing businesses to expand their reach by selling online.

Everyone from small used car dealers to giant companies like Dell Computers have discovered that eBay is an excellent place to hawk their wares simply due to the huge number of folks who visit the eBay site on a daily basis. Nowhere else on earth will you find such a large pool of potential customers.

Consider these numbers:

• There are nearly 69 million eBay users who spend $59 million every day.

• Most eBay sellers are home-based businesses that sell every- thing from porcelain dolls to locks of Elvis' hair to $100,000 Mercedes convertibles to $5 million dollar vacation homes.

• Every minute of every day more than 150 new items are listed for sale, more than 500 bids are placed, and seven new people register to shop on eBay.

• At any given moment, eBay is conducting some 12 million auctions, divided into about 18,000 different categories.

• About two million new items are offered for sale every day, and 62 million registered users scour the site to find them.

When it comes down to the mechanics of it all, running an eBay business is no different than running a brick and mortar business. You still have the same considerations regarding product selection, inventory purchasing, product pricing, inventory management, order processing, fulfillment, customer service, etc.

One of the biggest obstacles to building a successful eBay business may be the stiffness of the competition. Many sellers sell identical items and the price wars often get ugly, but that's to be expected in a free market place, which is exactly what eBay is.

So, can you build a profitable business selling on eBay?

Certainly, thousands of people have done it and so can you.

Here are a few tips to help get you started.

Sell Quality Products Don't sell junk! Leave the knick-knacks and fake leather jackets to the less informed. You should offer only quality products at a fair price.

Research The Competition Once you have your product in mind, don't invest a dime on inventory until you have spent some time on eBay to see what the competition is doing. If you want to sell motorcycle helmets, for example, you should look at current auctions to see how many others are selling similar helmets and what prices they are charging.

Test, Test, Test A fair portion of eBay auctions result in no sales, so it's best to test the waters before jumping in with both feet.

List a few items and see how they sell. If an item doesn't sell, list it at least twice more. Some items might not sell the first time, but may the second or third, then sell steadily from then on.

If an item gets no bids the first time, consider adjusting your price or your terms. If an item sells well, keep it in stock and then experiment with another item.

Do Your Homework eBay is too broad a subject to be covered fully here, but there are a multitude of books available that can help you start an eBay business. In fact, I bet you'll find most of them for sale at this very moment at eBay.


Author Resource:->  Please browse for more information at our websites





http://www.mining-auction-gold.com/





http://www.infozabout.com/

Article From ArticleSlide.com

Great Reasons to a Wear Motorcycle Helmet

By: Kevin Bailey

Wearing of motor cycle helmets is a very crucial safety precaution in prevention of head injuries associated with falls. According to the National Highway Traffic Safety Administration, NHTSA, a person wearing a motorcycle helmet has lower chances of fatalities from accidents compared to a person without a helmet. There are many reasons to wear motor cycle helmet, which include protection of face, ears and head from injuries. Due to availability of many varieties of helmets, one has a wide variety to choose. Some helmets are open to allow entry of wind to cool the face; others have a face guard that protects the face from wind.

When purchasing a motorcycle helmet, the price should not dictate the type of helmet bought, but the ability of the helmet to protect the head from impact. The helmet interior should be soft and warm. One of the reasons why a helmet is essential is because they allow riders to communicate with other riders through the hands free intercom system installed in helmets. Some people enjoy riding while enjoying the breeze and air thus they take off the helmet. For this reason, some helmets have adjustable face guards that allow entry of air while riding. These motorcycle helmets offer protection while enjoying cool air and breeze.

Other reasons to wear motor cycle helmets include the soft and warm interior of the helmets. Consequently, helmets are comfortable to wear. They prevent intense wind, which results to colds and eye disorders. They also protect riders from dust that leads to eye and respiratory tract diseases. Wind associated with riding is responsible for bone and joint disorders experienced by old riders. The helmet prevents these from occurring thus maintaining the health of the riders. Motorcycles helmets prevent burning effect on the head in case of falling. Burning effect occurs due to friction between the surface and head. Another protective aspect of motorcycle helmet is for safety during the night because of their shiny colors. At night, the shinny reflection prevents accidents from occurring since drivers are able to see the riders.

In the air, numerous bugs affect riders without helmets, therefore helmets boost rider's health and well-being. Helmets reduce rider fatigue associated with wind and noise thus enhancing the riding activity. Wearing a helmet portrays a rider as a responsible rider with affirmative attitude towards riding. Apart from protective purposes, the riders with helmets appear stylish thus enhancing beauty. Availability in many colors enhances variety. Riders modify their appearance as they ride.

When choosing a helmet, one must ensure it has the necessary features. A full-face helmet that has a screen is the best option. This type of helmet offers protection to the eyes, ears and head. Modern helmets are light but made of hard materials that is resistant to pressure and friction. Due to the light material, riders do not complain of fatigue. When purchasing a helmet, one should check for DOT or SNELL labels either on the outside or inside of helmet.


Author Resource:->  Kevin Bailey loves motorcycles.

Safety is very important when it comes to riding.

If you want to be safe, take a look at Cheap Helmets, HJC Helmets, and HCI Helmets.

Article From ArticleSlide.com

Reasons Not To Wear a Motorcycle Helmet

By: Kevin Bailey

There has been a big debate about cyclists safety and helmets. Perhaps one of the biggest discussion was when coming up with reasons not to wear a motorcycle helmet. Most people argue that helmets are only good for a speed of up to 15-18 miles per hour. If one goes faster that this and gets an accident, the helmet will not save his/her life. It is a choice for each person to wear a helmet or not. A study reported in the American journal of Public Health reveals that the abolishment of motorcycle helmet requirement for adults has been linked with a rise in motorcycle fatalities. Although the researchers argument is based on the universal helmet laws, the impact of these helmets is modest.

Some anti-helmet law activists dispute that helmets that are on balance, reduce motorcycle safety. This is because they make riders reckless, make their heads heavy or impair their vision, sensitivity to pressure and hearing abilities change. However, there is no much evidence to support this claim. It does not seem to have a very big effect but in principle, the fatality rate should not matter. The right to ride with no a helmet should not center on around how huge the risk is. In addition to questioning how effective helmets are, motorcycle activists have suggested that helmets contribute to causing accidents because they impair hearing, increase fatigue and impair peripheral vision. When an accident occurs, the additional weight increases the risk of spine and neck injury. Most motorcycle riders have attested that helmets are an unsafe obstruction to vision.

The argument as to why motorcycle riders should wear helmets is not firm because of the Peltzman effect. Cyclists wearing helmets take the advantage of an increase in safety and in return take more risks. Some of these risks include cycling at high speeds and running red lights. In this view, helmets give cyclists the benefit to reach their destinations faster and this makes them less safe. It is not true that the use of helmets is only justified in cycling because it is more dangerous than driving or walking. The risks of cycling are almost the same as those of pedestrians.

Wearing a helmet decreases the chances of getting brain injury, but increases the impact of the incidence on the thoracic and cervical spine fractures, which are sustained in motorcycle crashes. Helmets have been said to increase the risk of spinal fractures. When coming up with reasons not to wear a motorcycle helmet, comfort was a big topic of discussion. While buckling up a seat belt is painless for many people, wearing a motorcycle helmet is not. This is because the helmet is heavy and it covers most of the rider's head. This can be sweaty and tiring especially when it is hot. When sitting on a spotlight under 100% humidity with the sun heating up so hard and heat coming off the road, one may even pass out. There have been reported cases of motorcycle riders passing out on the spotlights with their helmets on.

Motorcycle helmets are viewed as stifling and confining meshes and forcing motorcycle riders to wear them ruins their freedom experience. Helmets are believed to increase the chances of attaining severe injuries on the neck and offset the chance to have a brain injury. Most people argue that wearing motorcycle helmet and seat belts are a personal decision and should not be a state law made by government. People have still not come up with satisfactory reasons on whether to wear or not to wear a motorcycle helmet.


Author Resource:->  Kevin Bailey loves motorcycles.

Safety is very important when it comes to riding.

If you want to be safe, take a look at Cheap Helmets, KBC Helmets, and M2R Helmets.

Article From ArticleSlide.com